EdisonStandardOwnersManual-RevA-20170818B - 第56页
I NSTALLATION AND I NITIA L S T A R T -U P Edison Printer User Manual (Part Number 1023838) 56 Rev. A Copyright © 2017 ITW EAE All rights reserved. No part of the contents of thi s manual may be reproduced, copied or tra…
Edison Printer User Manual (Part Number 1023838) INSTALLATION AND INITIAL START-UP
Rev. A 55
Copyright © 2017 ITW EAE
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of ITW EAE, unless for purchaser's personal use.
3.4.1. Hood Blocks
Remove the two foam blocks from between the hood and the side covers.
3.4.2. Table Lift Brackets
Remove the two table lift shipping brackets and the RBO tags at the rear of the rear table
assembly (Figure 30).
3.4.3. Vision XY Bracket
Remove the one Vision XY shipping bracket and associated RBO securing the vision gantry to
the right side of the printer frame, as viewed from the rear of the
printer.
Figure 30. Remove Table Lift Brackets.
Figure 31. Remove Vision
XY Bracket.
INSTALLATION AND INITIAL START-UP Edison Printer User Manual (Part Number 1023838)
56 Rev. A
Copyright © 2017 ITW EAE
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of ITW EAE, unless for purchaser's personal use.
3.4.4. Wiper Bracket (Front)
Remove the two front wiper shipping brackets and RBO tags
securing the wiper to the frame (Figure 32).
3.4.5. Wiper Bracket (Rear)
Remove the rear wiper shipping bracket and RBO tag, located
behind the take-up roll (Figure 33).
3.4.6. Panel Support Blocks (Front and Rear)
Lift the front panel support and remove the two foam
blocks from between the panel support and the work table.
Repeat for the rear panel support (Figure 34).
Figure 32. Remove two front wiper
shipping brackets.
Figure 33. Remove rear wiper shipping
bracket.
Figure 34. Remove panel support blocks--front
& rear.
Edison Printer User Manual (Part Number 1023838) INSTALLATION AND INITIAL START-UP
Rev. A 57
Copyright © 2017 ITW EAE
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of ITW EAE, unless for purchaser's personal use.
3.4.7. Shuttle Brackets
Remove the two shuttle shipping brackets and
associated RBO tags from the printer (Figure 35).
3.4.8. Stage Brackets
Remove the two stage shipping brackets and
associated RBO tags from the right and left sides of
the printer (Figure 36).
Figure 35. Remove two shuttle brackets.
Figure 36. Remove two stage brackets.