IPC-A-610C(电子组装件的验收条件) - 第371页
Contact any of the approved IPC-A-610 Certification Centers listed below for course locations, times and fees. ACME, INC. Constantino J. Gonzalez 513 Cleveland St., Suite # 300 Rapid City, SD 57701 USA (P) (605) 381-5963…
Standards
IPC/EIA J-STD-001C Requirements for Soldered Electrical and Electronic Assemblies
This is the industry standard for commercial and high-reliability assemblies. MIL-STD-2000 has been
cancelled, leaving J-STD-001C as the sole industry-consensus standard for soldering. This standard
describes materials, methods and verification criteria for producing quality soldered interconnections
and assemblies. Co-produced with EIA.
IPC/EIA J-STD-002A Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
Covers the assessment of the solderability of electronic component leads, terminations, solid wire,
stranded wire, lugs and tabs. Prescribes test methods, defect definitions, acceptance criteria and illus-
trations for suppliers and users. Co-produced with EIA.
ANSI/J-STD-003 Solderability Tests for Printed Boards
Contains industry-recommended test methods, defect definitions and illustrations for suppliers and
users to assess the solderability of printed board surface conductors, lands and plated-through holes.
Test methods covered include edge dip, rotary dip, solder float, wave solder and wetting balance.
Co-produced with EIA.
ANSI/J-STD-004 Requirements for Soldering Fluxes (Includes Amendment 1)
Describes general requirements for classifying and testing of rosin, resin, organic and inorganic fluxes
for high quality interconnections. This standard is a flux characterization, quality control and procure-
ment document for solder flux and flux-containing materials of all compositions, including no-clean.
Supersedes QQ-S-571 and MIL-F-14256. Co-produced with EIA.
ANSI/J-STD-005 Requirements for Soldering Pastes
Lists general requirements for characterization and test of metal content, viscosity, slump, solder ball,
tack and wetting of solder pastes. (This is a quality control document and is not intended to relate
directly to a material’s performance in the manufacturing process.) Supersedes QQ-S-571.
Co-produced with EIA.
ANSI/J-STD-006 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed
Solid Solders for Electronic Soldering Applications
Describes requirements and test methods for electronic grade solder alloys, and for fluxed and non-
fluxed bar, ribbon, and power solders other than solder paste for electronic grade solders. Supersedes
QQ-S-571 and MIL-F-14256. Co-produced with EIA.
IPC-T-50F Terms and Definitions for Interconnecting and Packaging Electronic Circuits
This standard provides descriptions and illustrations to help users and their customers speak the same
language. Also included is a section of acronyms and an index of IPC-T-50F terms by technology types.
IPC-A-600F Acceptability of Printed Boards
Contains full-color photographs and illustrations of preferred, acceptable and rejectable conditions for
plated-through holes, surface plating, solder coating, base materials, etching, conductors, mechanical
processes, flexible and multilayer boards; bow/twist, flat cable and other conditions of printed wiring
boards.
IPC-CC-830A Qualification and Performance of Electrical Insulating Compound for Printed
Board Assemblies
This is the industry standard for qualifying conformal coating. It was designed and constructed with the
intent of obtaining maximum information about the confidence in the electrical insulating compound
(conformal coating) material under evaluation with a minimum of test redundancy. Includes evaluation
of material properties and procedures to qualify a coating using the standard test board.
IPC-SM-840C Qualification and Performance of Permanent Solder Mask
Streamlines solder mask classes into two classifications: H (high reliability) and T (telecommunications).
IPC-SM-840C also integrates Bellcore requirements (class T) and provides minimum voltage break-
down, defines mask formulation latitude, adds new mask chemistries and more.
For latest pricing information, visit our website at www.ipc.org
APPLICABLE DOCUMENTS TO THE IPC-A-610
Contact any of the approved IPC-A-610 Certification Centers listed below for course locations,
times and fees.
ACME, INC.
Constantino J. Gonzalez
513 Cleveland St., Suite # 300
Rapid City, SD 57701 USA
(P) (605) 381-5963
(F) (605) 341-4261
Advanced Rework
Technology - A.R.T.
Throws Farm, Stebbing, Dunmow,
Essex CM6 3AQ
England
(P) +44 1371 856050
(F) +44 1371 856037
Alenia Marconi Systems
Kelvin Building
Hillend Industrial Park
Hillend by Dunfermline
Fife Scotland
KY11 9JE
(P) +44 (0) 1383 836179
(F) +44 (0) 1383 824401
ATTEC Australia
52 Curzon Street
Camden Park S.A 5038
Australia
(P) +61-8-8295-3476
(F) +61-8-8376-1154
www.attecaustralia.com
Contact: Lyn Dayman
BESTInc.
3603 Edison Place
Rolling Medows, IL 60008
(P) (847) 797-9250
(F) (847) 797-9255
Blackfox Training Institute, LLC
455 Weaver Park Road, Suite 400
Longmont, CO 80501
(P) (888) 837-9959
(F) (303) 682-0094
DELTA Quality & Certification
Venlighedsvej 4
DK-2970 Hoersholm
Denmark
(P) +45 45 86 77 22
(F) +45 45 86 15 96
EMPF/ACI
International Plaza One, Suite 600
Philadelphia, PA 19113
(P) (610) 362-1200
(F) (610) 362-1290
Ensil Canada Ltd.
205 Torbay Road
Markham, ON L3R 3W4
Canada
(P) (800) 265-0009
(F) (800) 565- 5329
EPTAC Corporation
71 Route 101A, Unit 1
Amherst, NH 03031
(P) (603) 673-7822 / (800) 643-7822
(F) (603) 673-8787
Hong Kong Productivity Council
HKPC Building, 3rd Floor
78 Tat Chee, Yau Yat Cheun
Kowloon, Hong Kong
(P) +852 2 788 5678
(F) +852 2 788 5405
HYTEK
Dannesbrogsgade 58
DK-9000 Aalborg
Denmark
(P) +45 9811 7003
(F) +45 9816 4795
Keystone International
1006 E. Yager Lane, Suite 110
Austin, TX 78753
(P) (512) 339-2030
(F) (512) 339-2121
Manufacturing Technology
Training Center (MTTC)
603 Graaf Street
Ridgecrest, CA 93555
(P) (760) 446-5571
(F) (760) 446-4337
Omni Training Corp.
9513 Business Center Drive, Suite J
Rancho Cucamonga, CA 91730-4500
(P) (909) 945-9495
(F) (906) 945-9459
PIEK International
Education Center
(I.E.C.) B.V.
Schelsberg 111-113
6413 AC HEERLEN
The Netherlands
(P) +31 45 570 3333
(F) +31 45 570 3320
Quality Technology Company
635 E. Remington Rd., Suite D
Schaumburg, IL 60173
(P) (847) 884-1900
(F) (847) 884-7280
Sincotron Sverige AB
Box 137
Stormbyvagen 2-4
S-163 29 Spσnga
Sweden
(P) +46 8 795 24 00
(F) +46 8 795 24 10
Soldering Technology
International
102 Tribble Drive
Madison, AL 35758
(P) (800) 858-0604
(F) (256) 461-9566
Solder School Europe
Oriel Training Services
Telford Road
Eastfield Industrial Estate
Glenrothes, Fife KY7 4NX
Scotland
(P) +44 1592 632 209
(F) +44 1592 631 340
The Surface Mount
& Circuit Board
Association Inc
PO Box 3140
MURRUMBEENA VIC 3163
Australia
(P)61-3-9568 0599
(F)61-3-9568 0622
TCS
P.O. Box 5313
Manchester, NH 03108
(P) (800) 955-4842
(F) (603) 627-0423
Teamsource, Inc.
2320 Donley Drive, Suite A
Austin, TX 78758
(P) (800) 489-0585
(F) (512) 834-9693
ZVE
6, Argelsrieder Feld
D-82234 Oberpfaffen Wessling,
Germany
(P) +49 8153 403 21
(F) +49 8153 403 15
APPROVED IPC-A-610 TRAINING AND CERTIFICATION CENTERS
For ordering information, contact IPC at:
Phone: (847) 790-5362 Fax: (847) 509-9819 Web: www.orderipc@ipc.org
More Acceptability
RESOURCES
IPC-DRM-SMT
Surface Mount Solder
Joint Evaluation -
Desk Reference Manual
This desk reference manual
will help your workforce
understand and apply the
surface mount acceptance
criteria from IPC-A-610 and
J-STD-001. IPC-DRM-SMT
contains color graphics for
chip component, gull wing
and J-Lead solder joints. 36
pages. Released July 1998.
IPC-A-610C Illustrations on CD-ROM
IPC is offering IPC-A-610C illustrations
electronically in a fully editable TIF for-
mat for individual purchase. The TIF
files are the same size as they appear
in the hard copy and the size can be
adjusted. All TIF files are high res-
olution and full-color.
Your purchase of these graphics
gives you unlimited rights to use
these illustrations for internal cor-
porate use. Permission is not
granted for resale or transfer to
other corporations.
Surface Mount Solder Joint Evaluation Wall Posters
and Inspection Sheets
Based on the popular DRM-SMT Desk Reference Manual,
these IPC Surface Mount Solder Joint Evaluation Wall Posters
clearly illustrate the limits of component misalignment and mini-
mum solder joint sizes for the three major component types:
Chips, J-Leads, and Gull Wings. The minimum acceptance requirements from IPC-A-610
and J-STD-001 have been visually redefined in high-quality graphics. Illustrations include:
Side Overhang, End Joint Width, Heel Fillet Height and others, for both Class 2 and Class 3 components.
Purchase quantities and save!
Quantity: 1-9 10-24 25-49 50+
IPC Members: $25 $20 $17.50 $15
Nonmembers: $50 $40 $35 $30
IPC-DRM-40
Through-Hole Solder
Joint Evaluation –
Desk Reference Manual
Through-hole assembly in-
spectors now have an easy-
to-use desk reference man-
ual that contains pictorial
interpretations of the solder-
ing requirements of J-STD-
001 and the additional sol-
dering workmanship stan-
dards contained in IPC-A-
610. Clear, conclusive pho-
tographs are provided for
target conditions, minimum
acceptable conditions, non-conforming process indicators
and non-conforming defects in a simple to understand for-
mat. A terminology section is included for easy reference.
32 pages. Released May 1997.
Quantity: 1-9 10-24 25-49 50+
IPC Members: $20 $17.50 $15 $12.50
Nonmembers: $40 $35 $30 $25
Contact IPC order department for pricing.
ASSOCIATION CONNECTING
ELECTRONICS INDUSTRIES
®
20x28 inch Surface Mount Evaluation/Inspection Posters for Class 2 (set of
3) (one for each component type). Laminated with eyelets for hanging.
PSMTL-2 IPC Members: $100 Nonmembers: $200
20x28 inch Surface Mount Evaluation/Inspection Posters for Class 3 (set of 3)
Laminated with eyelets for hanging.
PSMTL-3 IPC Member: $100 Nonmembers: $200
8.5X11 inch Laminated SMT Inspection Guidelines for Class 2 (set of 3)
PSMTS-2 IPC Members: $25 Nonmembers: $50
8.5X11 inch Laminated SMT Inspection Guidelines for Class 3 (set of 3)
PSMTS-3 IPC Member: $25 Nonmembers: $50