3m-mediawebserver.pdf - 第100页

95 T est Equipment Notes T est Equipment

For more product information, please visit www.3M.com/static

™

ESD Pro

ESD Pro is a hand-held indicator of ESD events that shows the relative

strength of each ESD event and counts the number of ESD events above

the set threshold. ESD events, or electrostatic discharges, can damage

sensitive electronic components. The ultimate goal of ESD protection

such as grounding, wrist straps, ionizers and static dissipative mats is to

prevent ESD events, or at least decrease their strength and frequency of

occurrence. The only way to verify that your ESD protection works is by

knowing whether you have ESD events in your environment, how strong

they are and how many of them occur. Thus, ESD Pro serves as your

ultimate measure of effectiveness of your ESD protection.

ESD Pro is capable of rejecting most non-ESD related EMI

(electromagnetic interference) events. This methodology allows

assessment of the ESD environment in places where EMI events

resulting from stepper motors, solenoids, relays, etc. occur.

Product No. Description

CTC082

Hand-held ESD event indicator with event

count, adjustable threshold and relative event

strength indicator.

Size, in. (cm)

6.25 H x 3.75 W x 1.25 L (15.8 x 9.5 x 3.3)

™

ESD Pro

Test Equipment

Notes

Test Equipment

For more product information, please visit www.3M.com/static

EMI/ESD Diagnostics Kit

Comes with:

• Miniature active radiated antenna CTS001

• Miniature active radiated omni-directional antenna CTC112

• Miniature active conducted antenna CTC116 for measuring emissions

on wires and cables

• Portable 2-channel interface module with rechargeable batteries

• AC/DC Universal Power Supply/Charger

• Two 2 ft. (0.6 m) RF cables from interface to an oscilloscope

• Two 6 ft. (1.8 m) RF cables from antenna to interface module

• User’s Guide

™

EMI/ESD Diagnostics Kit

EMI can cause serious problems for sensitive equipment and processes,

such as equipment malfunction, latch-ups and software-related errors.

Even very weak ESD events can create disaster for manufacturers of

sensitive components such as disk drives, semiconductors, or flat panel

displays. Identification of these EMI sources is possible with a series of

instruments from 3M.

The 3M EMI/ESD Diagnostics Kit will help you perform waveform and

spectral analysis of electro magnetic interference and of emission

from electrostatic discharges. The kit includes a set of miniature active

broadband antennae for radiated and conducted emission, an interface

module and a set of RF cables. Simply connect the output of an active

antenna to your high-speed oscilloscope and observe or measure ESD

events as they occur. For complete EMI analysis, use the antenna with

your spectrum analyzer to capture the spectral content of emission.

Active miniature antenna work in a broad frequency range, offer high

sensitivity and are able to measure radiated and conducted emission in

various environments.

Features

• Flat frequency response over a very broad range provides precise signals.

• Miniature antenna allows for use in tight spaces.

• Built-in preamp virtually eliminates the need for additional amplification.

• Antenna included in the EMI/ESD Diagnostics Kit provides measurements

of both radiated (via air) and conducted (via cables) emission.

™

Interface Module

The interface module contains everything you need to connect your

miniature active antennae to an oscilloscope or to a spectrum analyzer.

3M Interface Module CTA225 works with all our active antennae,

providing them with power via the same RF coax cable used for signal

by utilizing a special phantom supply circuit.

CTA225 has two channels and allows any two antennae to be used

simultaneously. CTA225 contains a rechargeable battery that will provide

hours of operation without the need for an external power supply and with

full isolation from noisy power lines. A universal supply charger is included.

Field Electric Antenna CTS001 Electric Antenna CTC112 Magnetic Antenna CTC116

Emission

Radiated Radiated Conducted

Sensitivity (typ.)

-18 dBm (28 mV)/(1 V/m) -16 dBm (35 mV)/(1 V/m) -22 dBm (15 mV)/(1 mA)

Frequency Range

1 MHz..2.7GHz 1 MHz..3GHz 150 kHz..200 MHz

Output Impedance

50 ohm 50 ohm 50 ohm

Type

Active Active Active

Sensor Element

Internal Internal Split-core magnetic

Connector

SMA SMA SMA

Power

5 V, phantom 5 V, phantom 5 V, phantom

Dimension

0.75 in. x 1.7 in.

(19 mm x 43 mm)

1.06 H x 1.77 W x 0.78 in. L

(27 x 45 x 20 mm)

1.3 H x 2.38 W x 0.8 in. L

(33 x 61 x 20.5 mm)

Applications

Hand-held measurements Hand-held, stationary and

semi-stationary measurements

Hand-held, stationary and

semi-stationary measurements

™

Interface Module CTA225

Test Equipment