TX_V2_年保养英文 - 第18页
www.asm-smt.com
1 WF 4 TX-Series V2 Maintenance Test the tape cutter 2 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C1
www.asm-smt.com
13 Remove the paper. 14 Check the edge for a clean cut. 15 If the result is NOT OK contact service.
16 Close the cover. 17 Repeat steps 1 to 16 for the other location.
www.asm-smt.com
2 WF 4 TX-Series V2 Maintenance Shut down, remove all tables (COT) and exchange all nozzles 2 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W2, W58
Consumables:
www.asm-smt.com
1 Select all heads. 2 Click on "Prepare for exchange and shut-
down".
3 Click on "No report, just prepare for ex-
change and shutdown", if required.
4 Press the stop button. 5 Click on "Shut down". 6 Open the covers.