TX_V2_年保养英文 - 第25页
5 WF 4 TX-Series V2 Maintenance Return a maintained TH 6 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine…
4 WF 4 TX-Series V2 Maintenance Remove the TH to be maintained 6 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T31, T87
Wear Part: Consumables:
www.asm-smt.com
7 Put the head segment into the transport
container.
8 Unplug the three compressed air connec-
tions from the right TH segment.
9 Unplug the two ribbon cables from the TH
segment.
10 Remove the three screws fixing the TH
segment (1) to (3).
11 Hold the TH segment and remove the last
screw before taking it off.
12 Put the head segment into the transport
container.
5 WF 4 TX-Series V2 Maintenance Return a maintained TH 6 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T87
Wear Part: Consumables:
www.asm-smt.com
1 Take the first TH segment out of the trans-
port box.
2 Put the TH segment to the head mounting
plate and fix it slightly with one screw.
3 Insert the other three screws (1) to (3) and
fix them slightly.
4 Fasten all screws (1) to (4) with a torque
of 2.7 Nm.
5 Connect the two ribbon cables. 6 Connect the three compressed air connec-
tions.
5 WF 4 TX-Series V2 Maintenance Return a maintained TH 6 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T87
Wear Part: Consumables:
www.asm-smt.com
7 Repeat steps 1 to 6 for the second TH
segment.
8 Mount the camera visual shield with the
two screws.