TX_V2_年保养英文 - 第34页
8 WF 4 TX-Series V2 Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 6 min 2 / 3 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e…
8 WF 4 TX-Series V2 Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 6 min 1 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89, T90
Wear Part: Consumables:
C3, C5, C31, C49
www.asm-smt.com
1 Mount the grease nipple adapter X-Axis. 2 Mount the stroke limiter X-Axis 0.15 gr
side to the grease gun.
3 Move the gantry to a good working posi-
tion.
4 Position the adapter straight onto the lub-
rication nipple.
5 Squeeze the grease gun once. 6 Grease emerges at the grease nipple.
8 WF 4 TX-Series V2 Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 6 min 2 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89, T90
Wear Part: Consumables:
C3, C5, C31, C49
www.asm-smt.com
7 If NOT go to step 9. 8 If YES contact service. 9 Move the X-Axis back and forth for about
30 cm.
10 Repeat steps 4 to 9 twice. 11 Remove the excess grease around the
grease nipple.
12 Repeat steps 4 to 11 for the other grease
nipples at the same gantry.
8 WF 4 TX-Series V2 Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 6 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89, T90
Wear Part: Consumables:
C3, C5, C31, C49
www.asm-smt.com
13 Clean the X-Axis linear guide. 14 Clean the X-Axis scale. 15 Repeat steps 4 to 14 on the X-Axis of the
other gantry.