OM-338-PT Solder Paste 96.5SN3.0AG0.5CU 88.5-4-M16-MSDS(7).pdf - 第3页

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88. 5-4-M16 Page: 3/14 Section 4. First aid measures Protection of f irst-aiders : No action shall be taken involvi ng any personal risk or without suitable training. Note…

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 2/14

Section 2. Hazards identification

Not classified.

Classification of the

substance or mixture

Signal word

No signal word.

Hazard statements

No known significant effects or critical hazards.

Precautionary statements

Prevention

Do not eat, drink or smoke when using this product.

Response

Get medical attention if you feel unwell.

Storage

Store in cool/well-ventilated place. Keep container tightly closed.

Disposal

Dispose of contents and container in accordance with all local, regional, national

and international regulations.

Other hazards which do not

result in classification

None known.

GHS label elements

Section 3. Composition/information on ingredients

tin

80-100

7440-31-5

Glycol Ether

1-10

silver

1-10

7440-22-4

Proprietary rosin

1-10

rosin

1-10

Ingredient name

CAS number

There are no additional ingredients present which, within the current knowledge of the supplier and in the

concentrations applicable, are classified as hazardous to health or the environment and hence require

reporting in this section.

Substance/mixture

Occupational exposure limits, if available, are listed in Section 8.

Mixture

Wash out mouth with water. Remove victim to fresh air and keep at rest in a

position comfortable for breathing. If material has been swallowed and the exposed

person is conscious, give small quantities of water to drink. Do not induce vomiting

unless directed to do so by medical personnel. Get medical attention if symptoms

occur.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower

eyelids. Check for and remove any contact lenses. Get medical attention if irritation

occurs.

Flush contaminated skin with plenty of water. Remove contaminated clothing and

shoes. Get medical attention if symptoms occur.

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Get medical attention if symptoms occur.

Section 4. First aid measures

Eye contact

Skin contact

Inhalation

Ingestion

Description of necessary first aid measures

Most important symptoms/effects, acute and delayed

Inhalation

No known significant effects or critical hazards.

Skin contact

No known significant effects or critical hazards.

Eye contact

Potential acute health effects

Continued on next page

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 3/14

Section 4. First aid measures

Protection of first-aiders

No action shall be taken involving any personal risk or without suitable training.

Notes to physician

Treat symptomatically. Contact poison treatment specialist immediately if large

quantities have been ingested or inhaled.

Specific treatments

No specific treatment.

No known significant effects or critical hazards.

Ingestion

Over-exposure signs/symptoms

Skin contact

Ingestion

Inhalation

No specific data.

Eye contact

No specific data.

See toxicological information (Section 11)

Indication of immediate medical attention and special treatment needed, if necessary

Section 5. Fire-fighting measures

Promptly isolate the scene by removing all persons from the vicinity of the incident if

there is a fire. No action shall be taken involving any personal risk or without

suitable training.

Hazardous thermal

decomposition products

Specific hazards arising

from the chemical

Decomposition products may include the following materials:

carbon dioxide

carbon monoxide

metal oxide/oxides

No specific fire or explosion hazard.

Fire-fighters should wear appropriate protective equipment and self-contained

breathing apparatus (SCBA) with a full face-piece operated in positive pressure

mode.

Special protective

equipment for fire-fighters

Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media

None known.

Suitable extinguishing

media

Unsuitable extinguishing

media

Special protective actions

for fire-fighters

Section 6. Accidental release measures

Environmental precautions

Personal precautions, protective equipment and emergency procedures

No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from

entering. Do not touch or walk through spilled material. Put on appropriate

personal protective equipment.

Avoid dispersal of spilled material and runoff and contact with soil, waterways,

drains and sewers. Inform the relevant authorities if the product has caused

environmental pollution (sewers, waterways, soil or air).

For non-emergency

personnel

For emergency responders

If specialized clothing is required to deal with the spillage, take note of any

information in Section 8 on suitable and unsuitable materials. See also the

information in "For non-emergency personnel".

Continued on next page

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 4/14

Section 6. Accidental release measures

Move containers from spill area. Prevent entry into sewers, water courses,

basements or confined areas. Vacuum or sweep up material and place in a

designated, labeled waste container. Dispose of via a licensed waste disposal

contractor. Note: see Section 1 for emergency contact information and Section 13

for waste disposal.

Large spill

Move containers from spill area. Vacuum or sweep up material and place in a

designated, labeled waste container. Dispose of via a licensed waste disposal

contractor.

Small spill

Methods and materials for containment and cleaning up

Section 7. Handling and storage

Advice on general

occupational hygiene

Conditions for safe storage,

including any

incompatibilities

Eating, drinking and smoking should be prohibited in areas where this material is

handled, stored and processed. Workers should wash hands and face before

eating, drinking and smoking. Remove contaminated clothing and protective

equipment before entering eating areas. See also Section 8 for additional

information on hygiene measures.

Storage temperature: 0 to 10°C (32 to 50°F). Store in accordance with local

regulations. Store in original container protected from direct sunlight in a dry, cool

and well-ventilated area, away from incompatible materials (see Section 10) and

food and drink. Keep container tightly closed and sealed until ready for use.

Containers that have been opened must be carefully resealed and kept upright to

prevent leakage. Do not store in unlabeled containers. Use appropriate

containment to avoid environmental contamination. See Section 10 for incompatible

materials before handling or use.

Protective measures

Put on appropriate personal protective equipment (see Section 8).

Precautions for safe handling

tin

ACGIH TLV (United States, 3/2017).

TWA: 2 mg/m³, (as Sn) 8 hours.

silver

ACGIH TLV (United States, 3/2017). Notes:

Substances for which the TLV is higher

than the OSHA Permissible Exposure

Limit (PEL) and/or the NIOSH

Recommended Exposure Limit (REL).

See CFR 58(124) :36338-33351, June 30,

1993, for revised OSHA PEL.

TWA: 0.1 mg/m³ 8 hours. Form: Dust and

fumes

Section 8. Exposure controls/personal protection

Ingredient name

Exposure limits

Control parameters

Occupational exposure limits

tin

TW Minstry of Labor, labor permissible

workplace exposure standards, allowable

concentration (Taiwan, 6/2014). Notes: as

STEL: 4 mg/m³, (as Sn) 15 minutes.

TWA: 2 mg/m³, (as Sn) 8 hours.

silver

TW Minstry of Labor, labor permissible

workplace exposure standards, allowable

Ingredient name

Exposure limits

Continued on next page