OM-338-PT Solder Paste 96.5SN3.0AG0.5CU 88.5-4-M16-MSDS(7).pdf - 第4页

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88. 5-4-M16 Page: 4/14 Section 6. Accidental release me asures Move containers from spill area. Preven t entry into sew ers, water cours es, basements or c onfined areas. …

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 3/14

Section 4. First aid measures

Protection of first-aiders

No action shall be taken involving any personal risk or without suitable training.

Notes to physician

Treat symptomatically. Contact poison treatment specialist immediately if large

quantities have been ingested or inhaled.

Specific treatments

No specific treatment.

No known significant effects or critical hazards.

Ingestion

Over-exposure signs/symptoms

Skin contact

Ingestion

Inhalation

No specific data.

Eye contact

No specific data.

See toxicological information (Section 11)

Indication of immediate medical attention and special treatment needed, if necessary

Section 5. Fire-fighting measures

Promptly isolate the scene by removing all persons from the vicinity of the incident if

there is a fire. No action shall be taken involving any personal risk or without

suitable training.

Hazardous thermal

decomposition products

Specific hazards arising

from the chemical

Decomposition products may include the following materials:

carbon dioxide

carbon monoxide

metal oxide/oxides

No specific fire or explosion hazard.

Fire-fighters should wear appropriate protective equipment and self-contained

breathing apparatus (SCBA) with a full face-piece operated in positive pressure

mode.

Special protective

equipment for fire-fighters

Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media

None known.

Suitable extinguishing

media

Unsuitable extinguishing

media

Special protective actions

for fire-fighters

Section 6. Accidental release measures

Environmental precautions

Personal precautions, protective equipment and emergency procedures

No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from

entering. Do not touch or walk through spilled material. Put on appropriate

personal protective equipment.

Avoid dispersal of spilled material and runoff and contact with soil, waterways,

drains and sewers. Inform the relevant authorities if the product has caused

environmental pollution (sewers, waterways, soil or air).

For non-emergency

personnel

For emergency responders

If specialized clothing is required to deal with the spillage, take note of any

information in Section 8 on suitable and unsuitable materials. See also the

information in "For non-emergency personnel".

Continued on next page

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 4/14

Section 6. Accidental release measures

Move containers from spill area. Prevent entry into sewers, water courses,

basements or confined areas. Vacuum or sweep up material and place in a

designated, labeled waste container. Dispose of via a licensed waste disposal

contractor. Note: see Section 1 for emergency contact information and Section 13

for waste disposal.

Large spill

Move containers from spill area. Vacuum or sweep up material and place in a

designated, labeled waste container. Dispose of via a licensed waste disposal

contractor.

Small spill

Methods and materials for containment and cleaning up

Section 7. Handling and storage

Advice on general

occupational hygiene

Conditions for safe storage,

including any

incompatibilities

Eating, drinking and smoking should be prohibited in areas where this material is

handled, stored and processed. Workers should wash hands and face before

eating, drinking and smoking. Remove contaminated clothing and protective

equipment before entering eating areas. See also Section 8 for additional

information on hygiene measures.

Storage temperature: 0 to 10°C (32 to 50°F). Store in accordance with local

regulations. Store in original container protected from direct sunlight in a dry, cool

and well-ventilated area, away from incompatible materials (see Section 10) and

food and drink. Keep container tightly closed and sealed until ready for use.

Containers that have been opened must be carefully resealed and kept upright to

prevent leakage. Do not store in unlabeled containers. Use appropriate

containment to avoid environmental contamination. See Section 10 for incompatible

materials before handling or use.

Protective measures

Put on appropriate personal protective equipment (see Section 8).

Precautions for safe handling

tin

ACGIH TLV (United States, 3/2017).

TWA: 2 mg/m³, (as Sn) 8 hours.

silver

ACGIH TLV (United States, 3/2017). Notes:

Substances for which the TLV is higher

than the OSHA Permissible Exposure

Limit (PEL) and/or the NIOSH

Recommended Exposure Limit (REL).

See CFR 58(124) :36338-33351, June 30,

1993, for revised OSHA PEL.

TWA: 0.1 mg/m³ 8 hours. Form: Dust and

fumes

Section 8. Exposure controls/personal protection

Ingredient name

Exposure limits

Control parameters

Occupational exposure limits

tin

TW Minstry of Labor, labor permissible

workplace exposure standards, allowable

concentration (Taiwan, 6/2014). Notes: as

STEL: 4 mg/m³, (as Sn) 15 minutes.

TWA: 2 mg/m³, (as Sn) 8 hours.

silver

TW Minstry of Labor, labor permissible

workplace exposure standards, allowable

Ingredient name

Exposure limits

Continued on next page

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 5/14

Section 8. Exposure controls/personal protection

Environmental exposure

controls

Emissions from ventilation or work process equipment should be checked to ensure

they comply with the requirements of environmental protection legislation. In some

cases, fume scrubbers, filters or engineering modifications to the process

equipment will be necessary to reduce emissions to acceptable levels.

Appropriate engineering

controls

Good general ventilation should be sufficient to control worker exposure to airborne

contaminants.

Individual protection measures

concentration (Taiwan, 6/2014). Notes: as

STEL: 0.03 mg/m³, (as Ag) 15 minutes.

Form: Dust and fumes

TWA: 0.01 mg/m³, (as Ag) 8 hours. Form:

Dust and fumes

tin

ACGIH TLV (United States, 3/2017).

TWA: 2 mg/m³, (as Sn) 8 hours.

silver

ACGIH TLV (United States, 3/2017). Notes:

Substances for which the TLV is higher

than the OSHA Permissible Exposure

Limit (PEL) and/or the NIOSH

Recommended Exposure Limit (REL).

See CFR 58(124) :36338-33351, June 30,

1993, for revised OSHA PEL.

TWA: 0.1 mg/m³ 8 hours. Form: Dust and

fumes

Ingredient name

Exposure limits

tin

Ministry of Employment and Labor

(Republic of Korea, 8/2016).

TWA: 2 mg/m³ 8 hours.

silver

Ministry of Employment and Labor

(Republic of Korea, 8/2016).

TWA: 0.1 mg/m³ 8 hours.

paraffin

ACGIH TLV (United States, 6/2007).

TWA: 5 mg/m³

STEL: 10 mg/m³

Ingredient name

Exposure limits

tin

DOSH USECHH (Malaysia, 4/2000).

TWA: 2 mg/m³ 8 hours.

silver

DOSH USECHH (Malaysia, 4/2000).

TWA: 0.1 mg/m³ 8 hours.

Ingredient name

Exposure limits

tin

Workplace Safety and Health Act

(Singapore, 2/2006).

PEL (long term): 2 mg/m³ 8 hours.

silver

Workplace Safety and Health Act

(Singapore, 2/2006).

PEL (long term): 0.1 mg/m³ 8 hours.

Ingredient name

Exposure limits

Continued on next page