OM-338-PT Solder Paste 96.5SN3.0AG0.5CU 88.5-4-M16-MSDS(7).pdf - 第6页

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88. 5-4-M16 Page: 6/14 Section 8. Exposure control s/personal protection Hand protection Based on the haz ard and potential for exposure, select a respirator that m eets t…

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 5/14

Section 8. Exposure controls/personal protection

Environmental exposure

controls

Emissions from ventilation or work process equipment should be checked to ensure

they comply with the requirements of environmental protection legislation. In some

cases, fume scrubbers, filters or engineering modifications to the process

equipment will be necessary to reduce emissions to acceptable levels.

Appropriate engineering

controls

Good general ventilation should be sufficient to control worker exposure to airborne

contaminants.

Individual protection measures

concentration (Taiwan, 6/2014). Notes: as

STEL: 0.03 mg/m³, (as Ag) 15 minutes.

Form: Dust and fumes

TWA: 0.01 mg/m³, (as Ag) 8 hours. Form:

Dust and fumes

tin

ACGIH TLV (United States, 3/2017).

TWA: 2 mg/m³, (as Sn) 8 hours.

silver

ACGIH TLV (United States, 3/2017). Notes:

Substances for which the TLV is higher

than the OSHA Permissible Exposure

Limit (PEL) and/or the NIOSH

Recommended Exposure Limit (REL).

See CFR 58(124) :36338-33351, June 30,

1993, for revised OSHA PEL.

TWA: 0.1 mg/m³ 8 hours. Form: Dust and

fumes

Ingredient name

Exposure limits

tin

Ministry of Employment and Labor

(Republic of Korea, 8/2016).

TWA: 2 mg/m³ 8 hours.

silver

Ministry of Employment and Labor

(Republic of Korea, 8/2016).

TWA: 0.1 mg/m³ 8 hours.

paraffin

ACGIH TLV (United States, 6/2007).

TWA: 5 mg/m³

STEL: 10 mg/m³

Ingredient name

Exposure limits

tin

DOSH USECHH (Malaysia, 4/2000).

TWA: 2 mg/m³ 8 hours.

silver

DOSH USECHH (Malaysia, 4/2000).

TWA: 0.1 mg/m³ 8 hours.

Ingredient name

Exposure limits

tin

Workplace Safety and Health Act

(Singapore, 2/2006).

PEL (long term): 2 mg/m³ 8 hours.

silver

Workplace Safety and Health Act

(Singapore, 2/2006).

PEL (long term): 0.1 mg/m³ 8 hours.

Ingredient name

Exposure limits

Continued on next page

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 6/14

Section 8. Exposure controls/personal protection

Hand protection

Based on the hazard and potential for exposure, select a respirator that meets the

appropriate standard or certification. Respirators must be used according to a

respiratory protection program to ensure proper fitting, training, and other important

aspects of use.

Chemical-resistant, impervious gloves complying with an approved standard should

be worn at all times when handling chemical products if a risk assessment indicates

this is necessary.

Safety eyewear complying with an approved standard should be used when a risk

assessment indicates this is necessary to avoid exposure to liquid splashes, mists,

gases or dusts. If contact is possible, the following protection should be worn,

unless the assessment indicates a higher degree of protection: safety glasses with

side-shields.

Eye/face protection

Respiratory protection

Body protection

Personal protective equipment for the body should be selected based on the task

being performed and the risks involved and should be approved by a specialist

before handling this product.

Wash hands, forearms and face thoroughly after handling chemical products, before

eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and

safety showers are close to the workstation location.

Hygiene measures

Skin protection

Other skin protection

Appropriate footwear and any additional skin protection measures should be

selected based on the task being performed and the risks involved and should be

approved by a specialist before handling this product.

Section 9. Physical and chemical properties

Physical state

Melting point

Vapor pressure

Relative density

Vapor density

Solubility

Solid. [Paste.]

Not available.

Insoluble in the following materials: cold water and hot water.

Acrid.

Odor

Gray.

Color

Evaporation rate

Not available.

Auto-ignition temperature

Flash point

Not available.

Viscosity

Not available.

Odor threshold

Partition coefficient: n-

octanol/water

Appearance

Boiling point

Not available.

Flammability (solid, gas)

Not available.

Lower and upper explosive

(flammable) limits

Not available.

Decomposition temperature

Not available.

VOC

22.8 g/l

Continued on next page

ALPHA® OM-338-PT Solder Paste 96.5SN/3.0AG/0.5CU 88.

5-4-M16

Page: 7/14

Section 10. Stability and reactivity

Hazardous decomposition

products

Under normal conditions of storage and use, hazardous decomposition products

should not be produced.

The product is stable.

Chemical stability

Possibility of hazardous

reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Other Hazardous

decomposition products

carbon oxides (CO,

CO₂),

metal oxides, toxic. fumes

Section 11. Toxicological information

Acute toxicity

tin

LD50 Oral

Rat

>2000 mg/kg

Glycol Ether

LD50 Oral

Rat - Female

2600 mg/kg

silver

LD Oral

Guinea pig

>5 g/kg

LD Oral

Mouse

>10 g/kg

LD50 Oral

Mouse

100 mg/kg

LD50 Oral

Rat

>2000 mg/kg

Proprietary rosin

LD50 Oral

Rat

>2000 mg/kg

rosin

LD50 Dermal

Rabbit

>2.5 g/kg

LD50 Oral

Mouse

>3 g/kg

LD50 Oral

Rat

>4 g/kg

Product/ingredient name

Result

Species

Dose

Exposure

Carcinogenicity

Not available.

Mutagenicity

Not available.

Teratogenicity

Not available.

Reproductive toxicity

Not available.

Irritation/Corrosion

Not available.

Sensitization

Not available.

Information on the likely

routes of exposure

Specific target organ toxicity

Specific target organ toxicity (repeated exposure)

Not available.

Aspiration hazard

Not available.

Routes of entry anticipated: Oral, Dermal, Inhalation.

Potential acute health effects

Routes of entry

Dermal contact. Inhalation. Ingestion.

Continued on next page