PPS Pro version 8.2 - 第144页
User Manual 4022 591 98247 140 PPS-Pro v8.2 05.07 Guidelines for using PPS-Pro NOTE: Do not run the ‘Line Scheduler’ with these .con files since it cannot handle the track records. Use the Run Time Balancer instead. Tr a…
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 139
Guidelines for using PPS-Pro
3.8.1 Pre-assign tracks in a con file
SCREEN 85 Pre-assigning Multi Track feeders
NOTE: Pos 1 (left and right) as well as pos 49 and 50 (left and right) cannot be
used by trays. Position 1 will be used for calibration and position 49 and 50
can not be reached by the lift mechanism of the ACM.
3.8.2 Application of FeederBars
FeederBartypes 1-5 are all used only on FCM I machines whereas
FeederBar_ITF is used only on FCM- II, FCM-MF and FCM-XM machines.
NOTE: The relationship feeder – FeederBar is provided in the ALE file. (The example
provided states which feeders fit on a particular FeederBar.) Furthermore
note that FeederBar4 is designed as a fixed FeederBar for the WVM module
(on a FCM-I machine).
3.9 Pre-assign trays
Tray pre-assignments are possible by using .con files.
User Manual 4022 591 98247
140 PPS-Pro v8.2 05.07
Guidelines for using PPS-Pro
NOTE: Do not run the ‘Line Scheduler’ with these .con files since it cannot handle
the track records. Use the Run Time Balancer instead.
Tray component heights do not have an influence on the chosen position. So
thick trays can be assigned on adjacent positions. It is advised to run the
optimization in such a case with a pre-assignment and optimizer setting
‘From MDF’.
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 141
Guidelines for using PPS-Pro
APPENDIX A Machines Configurations
A.1 General
This appendix describes the possible machines configurations for the
PowerLine Machines (FCM-II, FCM-II Multiflex, FCM-II Extended Multiflex,
ACM) and for the machine types: AX, AQ-1 and D9. Following Acronyms are
used for these machine types in this document:
TABLE 9 References
At this moment Assembléon has 2 optimizers. One for the existing Power-
Line
TM
machines:
■ FCM-I
■ FCM-II
■ FCM-II Multiflex
■ FCM-II Extended Multiflex
■ ACM
■ D9
The A-Series opt/bal 1.2 supports the following machine types:
■ AX Base-3
■ AX Base-5
■ AQ-1
■ D9
A.2 Feeder Configurations
A.2.1 Tape Feeders
Table (see TABLE 10 on page 142) describes which Tape-Feeders Assembléon
has, the size relative to the pick-position (mm) and which machine they fit
on.
Machine Names
FCM-II FCM-II
FCM-IIM FCM-II Multiflex
FCM-IIXM FCM-II Multiflex Extended
ACM ACM
D9 D9
AQ-1 AQ-1
AX AX Base3 and Base5