PPS Pro version 8.2 - 第145页

4022 591 98 247 User Manual 05.07 P PS-Pro v8.2 141 Guidelines for using PPS-Pro APPENDIX A Machines Configurations A.1 General This appendix describes th e possible machin es configurations f or the P ow erLine Machines…

100%1 / 194
User Manual 4022 591 98247
140 PPS-Pro v8.2 05.07
Guidelines for using PPS-Pro
NOTE: Do not run the ‘Line Scheduler’ with these .con files since it cannot handle
the track records. Use the Run Time Balancer instead.
Tray component heights do not have an influence on the chosen position. So
thick trays can be assigned on adjacent positions. It is advised to run the
optimization in such a case with a pre-assignment and optimizer setting
‘From MDF’.
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 141
Guidelines for using PPS-Pro
APPENDIX A Machines Configurations
A.1 General
This appendix describes the possible machines configurations for the
PowerLine Machines (FCM-II, FCM-II Multiflex, FCM-II Extended Multiflex,
ACM) and for the machine types: AX, AQ-1 and D9. Following Acronyms are
used for these machine types in this document:
TABLE 9 References
At this moment Assembléon has 2 optimizers. One for the existing Power-
Line
TM
machines:
■ FCM-I
■ FCM-II
■ FCM-II Multiflex
■ FCM-II Extended Multiflex
■ ACM
■ D9
The A-Series opt/bal 1.2 supports the following machine types:
■ AX Base-3
■ AX Base-5
■ AQ-1
■ D9
A.2 Feeder Configurations
A.2.1 Tape Feeders
Table (see TABLE 10 on page 142) describes which Tape-Feeders Assembléon
has, the size relative to the pick-position (mm) and which machine they fit
on.
Machine Names
FCM-II FCM-II
FCM-IIM FCM-II Multiflex
FCM-IIXM FCM-II Multiflex Extended
ACM ACM
D9 D9
AQ-1 AQ-1
AX AX Base3 and Base5
User Manual 4022 591 98247
142 PPS-Pro v8.2 05.07
Guidelines for using PPS-Pro
TABLE 10 Intelligent Tape Feeders Feeder/Machine Relation
A.2.2 Special Feeders
This table describes which ‘Special’-Feeders Assembléon has, the size relative
to the pick-position (mm) and which machine they fit on.
TABLE 11 Special Feeders/Machine relation
Feeder
Name
Desc FCM-II FCM-IIM FCM-IIXM ACM D9 AQ-1 AX
TTF_08 TTF tape feeder 8mm X X X - - - X
ITF2_08 ITF2 tape feeder 8mm X X X X X X X
ITF2_08S ITF2 tape feeder 8mm X X X X X X X
ITF2_12 ITF2 tape feeder 12 mm X X X X X X X
ITF12W08 ITF2 tape feeder 12 mm X X
ITF2_16 ITF2 tape feeder 16mm X X X X X X X
ITF2_24 ITF2 tape feeder 24mm X X X X X X X
ITF2_32 ITF2 tape feeder 32mm X X X X X X X
ITF2_44 ITF2 tape feeder 44mm X X X X X X X
ITF2_56 ITF2 tape feeder 56mm X X X X X X X
UNIV_72 Universal feeder 72mm X X X
Feeder Name Desc. FCM-II FCM-IIM FCM-IIXM ACM D9 AQ-1 AX
TRAYSTCK ITF2 tray stacker
- Jedec
- - - X X X -
DEF2_08 ITF2 Die Eject
feeder 8mm
- - - X X X -
DEF2_12 ITF2 Die Eject
feeder 12mm
- - - X X X -
DEF2_16 ITF2 Die Eject
feeder 16mm
- - - X X X -
GPAX_72 ITF2 GPAX 2400
Ultraflex
- - - X X X -
ROB_ST ITF2 Robodyne
Tube
- - - X X X -
WPF_2 ITF2 waffle pack
feeder air
- - - X X X -
HOV_DD HOVER DAVIS
DIRECT DIE
- - - X X X -
HOV_IL HOVER DAVIS
LABEL
- - - X X X -
ROB_RAD ROBODYNE
RADIAL
- - - X X X -