PPS Pro version 8.2 - 第160页

User Manual 4022 591 98247 156 PPS-Pro v8.2 05.07 Guidelines for using PPS-Pro T ABLE 22 Feeder N ame / Feeder bar re lation A.5 Machine Configurations This chapter describes the possibl e hea d configurations f or the v…

100%1 / 194
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 155
Guidelines for using PPS-Pro
ISF2_45 X X - - - - - - X X
ISF2_50 X X - - - - - - X X
ISF2_55 X X - - - - - - X X
ISF2_60 X X - - - - - - X X
ISF2_65 X X - - - - - - X X
ISF2_70 X X - - - - - - X X
ISF2_75 X X - - - - - - X X
ISF2_80 X X - - - - - - X X
SF_SO08 X X - - - - - - X X
SF_SO14 X X - - - - - - X X
SF_SO16 X X - - - - - - X X
SF_SOL16 X X - - - - - - X X
SF_SOL20 X X - - - - - - X X
SF_SOL28 X X - - - - - - X X
SF_PL28 X X - - - - - - X X
SF_PL32 X X - - - - - - X X
SF_PL44 X X - - - - - - X X
SF_GEN X X - - - - - - X X
TBF2_C0201 - - - - - - X X - - X
TBF2_R0201 - - - - - - X X - - X
TBF2_C0402 - - - - - - X X - - X
TBF2_R0402 - - - - - - X X - - X
TBF2_C0603 - - - - - - X X - - X
TBF2_R0603 - - - - - - X X - - X
TBF2_C0805T060 - - - - - - X X - - X
TBF2_R0805 - - - - - - X X - - X
TBF2_MELF0604 - - - - - - X X - - X
SBF2_C0805T125 - - - - - - X X - - X
SBF2_MELF0805 - - - - - - X X - - X
WAFER - - - - - - - - - -
BQ23X23 - - X X X X - - - -
BQ28X28 - - X X X X - - - -
CQ28-52 - - X X X X - - - -
CQ44-84 - - X X X X - - - -
CQ52-100 - - X X X X - - - -
CQ68 - - X X X X - - - -
CQ68-132 - - X X X X - - - -
CQ84-164 - - X X X X - - - -
MQ10X10 - - X X X X - - - -
MQ10X10H - - X X X X - - - -
MQ14X14 - - X X X X - - - -
MQ14X14H - - X X X X - - - -
MQ14X20 - - X X X X - - - -
MQ14X20H - - X X X X - - - -
MQ28X28 - - X X X X - - - -
MQ28X28H - - X X X X - - - -
User Manual 4022 591 98247
156 PPS-Pro v8.2 05.07
Guidelines for using PPS-Pro
TABLE 22 Feeder Name / Feederbar relation
A.5 Machine Configurations
This chapter describes the possible head configurations for the various
machine types.
A.5.1 FCM-II – FCM-IIM – FCM-IIXM
A.5.1.1 Head Configuration
The FCM-II machines can have all 1 to 16 heads (Placement Modules) defined.
Two (2) different PM Types exist for the FCM-II machines: PM/LASER and
WPM/VISION. The WPM/VISION module occupies 2 PM/LASER positions and
can only be placed on the odd (1, 3, 5, etc.) positions. A WPM head has always
one camera for package alignment.
MQ32X32 - - X X X X - - - -
MQ40X40 - - X X X X - - - -
PB23X23 - - X X X X - - - -
PB27X27 - - X X X X - - - -
PB35X35 - - X X X X - - - -
PQ100 - - X X X X - - - -
PQ132 - - X X X X - - - -
PQ164 - - X X X X - - - -
PQ196 - - X X X X - - - -
PQ244 - - X X X X - - - -
PQ52 - - X X X X - - - -
PQ68 - - X X X X - - - -
PQ84 - - X X X X - - - -
TQ05X05 - - X X X X - - - -
TQ07X07 - - X X X X - - - -
TQ10X10 - - X X X X - - - -
TQ12X12 - - X X X X - - - -
TQ14X14 - - X X X X - - - -
TQ14X20 - - X X X X - - - -
TQ20X20 - - X X X X - - - -
TS06X16 - - X X X X - - - -
TS08X20 - - X X X X - - - -
TS10X20 - - X X X X - - - -
WP203X03 X X X X X X - - X X
WP205X05 X X X X X X - - X X
WP206X06 X X X X X X - - X X
WP207X06 X X X X X X - - X X
WP207X07 X X X X X X - - X X
WP213X10 X X X X X X - - X X
WP405X05 X X X X X X - - X X
4022 591 98247 User Manual
05.07 PPS-Pro v8.2 157
Guidelines for using PPS-Pro
TABLE 23 Placement Head / Feeder Position Relation
A.5.1.2 Feederbar Configuration
For FCM-II type machines, each PM/Laser Head has access to ONE
Feederbar_ITF. A WPM/Vision Head has access to TWO Feederbar_ITF.
A.5.1.3 Head Versus Feederbar Positions
The Feederbar_ITF has 11 slots on which a maximum of 6 8mm tapes fit
(TTF2_08, ITF2_08). These are then placed in slot: 1, 3, 5, 7, 9 and 11. Thus, it
is not possible to place an 8mm feeder in slot 1 and 2!
Following picture gives an overview of FCM-II type machines:
FIGURE 14 FCM-II machine diagram Top view
PM Type/Head Desc. Positions
PM/LASER Head with Laser Module 1, 2, 3, …. 16 (all positions)
WPM/VISION Head with camera: Occupies 2
PM/LASER positions
1, 3, 5, … 15 (odd positions)