4OM-1003-007 - 第100页

(20) Placement Height Correction Section 1.3 Maintenance Spots 0305-001 1-37 AIL01ETRP Fig. 4A42 Front View of Machine

100%1 / 409
Oil Inlet and Ball Surface of 3M15
Linear Guide Slide Block
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Wipe off old grease and inject new one from the
grease nipples with a grease gun.
* Use U- and P-type attachments.
Grease should be applied every 3 months after
the initial month.
Roller Rests 3M16
Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 3)
Apply grease with a dispense gun.
* Use RR-Type attachment.
Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 14 (olive) nozzle.
Cam Follower 3M14
U Type P Type
No.14
1.3 Maintenance Spots
0309-002 1-36 AIL01ETRP
Fig. 4A41 Pick-Up Up/Down Section
(20) Placement Height Correction Section
1.3 Maintenance Spots
0305-001 1-37 AIL01ETRP
Fig. 4A42 Front View of Machine
1.3 Maintenance Spots
0511-002 1-38 AIL01ETRP
Ball Surfaces of Linear Guide Slide Block 3M19
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 18 (green) or No. 19 (brown) nozzle.
Grease should be applied every 3 months after the initial
month.
Bearing Guide Planes 1M33
Every Month Lubrication (MOLYNOC GREASE AP1)
Apply grease with a dispense gun.
* Use No. 19 (brown) nozzle.
No.19
No.18
No.19
Fig. 4A43 Placement Height Correction Section