4OM-1003-007 - 第16页

Safe-5 AIL01E-P Safety Precautions Precautions before Use (continued) 0502-002 Do not use the floppy disk drive in the control box. The drive is provided only for the authorized maintenance personnel. CAUTION In principl…

100%1 / 409
Safe-4 AIL01E-P
Safety Precautions
0502-002
Precautions before Use
Confirm that no covers are disengaged before operating the
machine.
If the machine is used with its cover(s) being detached, a
serious accident may occur.
Be sure to attach them in place.
Make certain that no person or object comes in contact with the
moving mechanisms of the machine. Then, check safety and
power up the machine to start operation.
Do not start the machine unless those working in the immediate
area of the machine are aware of hazards from moving parts.
Do not modify the machine nor use any parts other than the
specified ones. Be sure not to use the machine with its safety
devices detached. Doing otherwise may cause personal injury.
Do not change the settings of OS (Operating System) or install
any applications additionally.
Remove the selection key of the [OPERATION] switch before
operating the machine automatically.
When the [OPERATION/SETUP] switch is set to the "SETUP"
side, the function of the front safety door check switch is not
activated.
The selection key must be used to set the [OPERATION] switch to the
"SETUP" mode and kept by the person in charge. In other cases, the key
should not be kept inserted.
WARNING
Do not set the [OPERATION] switch to the "SETUP" side unless
any setup operations are performed.
When the [OPERATION] switch is set to the "SETUP" side,
setup operations become possible with the front safety door
being open. It is very dangerous to operate the machine without
safety check. Be sure to pay a special caution while operating
the machine.
DANGER
Safe-5 AIL01E-P
Safety Precautions
Precautions before Use (continued)
0502-002
Do not use the floppy disk drive in the control box. The drive is
provided only for the authorized maintenance personnel.
CAUTION
In principle, the overall operation of the machine including the
button operations on the operation panel and the touch screen
must be controlled by only one person.
If there are more than one, ensure good communication by giving loud
verbal instructions to avoid any danger that might be caused by an
unexpected movement of the machine.
Even after the [EMERGENCY STOP] switch is pressed, note
that electrical power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to
"OFF".
When an "Emergency Switch Off" function is required, it must be
prepared on the customer side.
Emergency Switch Stop : Emergency Interception of Controlled Load
Power Sources
Emergency Switch Off : Emergency Interception of All Load Power
Sources
Data may become unavailable due to breakdown or mishandling of
the machine.
It is strongly recommended that the hard disk data be periodically
backed up with the network terminal (option).
CAUTION
Safe-6 AIL01E-P
Safety Precautions
0412-001
Notes on Machine Operations
This machine uses energetic driving systems and high voltage
to run at high speed. This power and voltage is high enough to
cause death or serious injury.
To avoid this danger, respect the following guideline.
zz
zz
z The machine must be used with the covers being attached.
DANGER
WARNING
Only a well-trained person should operate the machine.
Do not allow any untrained person to operate the machine.
z Confirm that the "LOCK" lamp (green) is ON before
operating the machine.
z If the "LOCK" lamp on the operation panel is not turned ON,
the machine can be operated at any time from both front and
rear sides, endangering the operators around the machine.
z Before performing any maintenance work, etc., with the
machine powered, be sure to press the [PNL CHANGE]
button on either the front or the rear operation panel and
confirm that the "LOCK" lamp is turned "ON".
While the machine is running, keep yourself or an object away
from any moving mechanisms.
Keep your face and hands away from any moving parts of the
machine during operation.
When there is a problem with the machine, locate the cause
and assess the condition. Set the power breaker to "OFF".
After the problem has been rectified completely, reset the
machine to its normal condition.