4OM-1003-007 - 第82页

(8) Light Source Device for Component Recognition 1.3 Maintenance Spots Lamp for Component Recognition 1Y1 Y early Replacement Replace the lamp every year or every 5,000 hours. Refer to "1.4.7 Lamp Replacement of Li…

Fig. 4A17 X/Y Table Section

1.3 Maintenance Spots

0305-001 1-18 AIL01ETRP

(8) Light Source Device for Component Recognition

1.3 Maintenance Spots

Lamp for Component Recognition 1Y1

Yearly Replacement

Replace the lamp every year or every 5,000 hours.

Refer to "1.4.7 Lamp Replacement of Light Source

Device for Recognition Lighting" for the replace-

ment.

0511-002 1-19 AIL01ETRP

Fig. 4A18

Fig. 4A19

(9) Head Section

1.3 Maintenance Spots

0511-004 1-20 AIL01ETRP

Fig. 4A20

Vacuum Nozzle 3M7

Every 3 Months Inspection

Check the condition of the vacuum nozzle. When the

nozzle end is worn out, replace it with a new one.

Note: Refer to "1.4.4 Detachment and Attachment of

Vacuum Nozzle" for the detailed information on

how to detach or attach the vacuum nozzle.

Lower Surface of Diffusion Plate 1M1

Every Month Cleaning

When dirt and dust have accumulated on the lower

surface of the diffusion plate, wipe them off with the

lens cleaning cloth (the standard accessory part).

Note: Never use neither solvent nor ethanol.

Otherwise, the diffusion plate may crack.

Vacuum Nozzle 1W7

Every Week Cleaning

• Clean the tapered area of the nozzle with a lens

cleaning cloth (standard accessory part).

• Detach the nozzle and blow air to remove dirt and

dust.

Note: When the nozzle is heavily stained, detach and

clean it with an ultrasonic cleaner or a rag

soaked in alcohol.

If alcohol is used with the nozzle being attached,

it will adhere to the diffusion plate, causing the

plate to crack.

Refer to "1.4.3 Cleaning of Vacuum Nozzle" for

details.

Upper Surface of Diffusion Plate 1W6-1

Every Week Checking/Cleaning

Check that no grease adheres to the upper surface of

the diffusion plate. When grease adheres to the upper

surface of the diffusion plate, wipe it off with a clean

cotton swab, etc.

Also, use a mirror to wipe off grease from the lower

surface of the diffusion plate.

Note: Never use neither solvent nor ethanol. Other-

wise, the diffusion plate may crack.

Refer to "1.4.5 Cleaning of Diffusion Plate

(Upper Surface)" for how to wipe off oil from the

upper surface of the diffusion plate.