4OM-1003-007 - 第91页
Fig. 4A28-1 Front View of Machine Linear Scale Encoder Head Linear Scale/Encoder Head 3M7-2 Every 3 Months Cleaning Clean the linear scales and encoder heads every three months or every time the linear guides are lubrica…
(13) Feeder Carriage Section
Fig. 4A28 Top View of Machine
1.3 Maintenance Spots
0511-005 1-27 AIL01ETRP
Linear Guide Rails 1M13
Every Month Cleaning
Clean the rails with an oiled rag.
Yoke Sides of Linear Motors 1M13-1
Every Month Inspection/Cleaning
Check for components and/or foreign substances
adhered to the yoke sides of the linear motors. If neces-
sary, clean the yoke sides with a rag.
Refer to "1.4.11 Cleaning of Linear Motor's Yoke Sides"
for details.
• Do not bring any metal of high magnetizability close
to this. Otherwise, such metal will easily be magne-
tized and attracted, causing an injury to the operator
and/or a mechanical breakdown.
• Do not bring any magnetizable material close to this.
Those who wear implanted pacemakers should not
work inside the machine. Otherwise, the pacemaker
may be affected by magnetism, leading to a serious
accident.
CAUTION
WARNING
Fig. 4A28-1 Front View of Machine
Linear Scale
Encoder Head
Linear Scale/Encoder Head 3M7-2
Every 3 Months Cleaning
Clean the linear scales and encoder heads every three months or every time the linear guides are
lubricated.
Refer to "1.4.10 Cleaning of Linear Scale Section" for details.
1.3 Maintenance Spots
0511-002 1-28 AIL01ETRP
Grease Nipples
Magnified View of Feeder Carriage
Slide Block of Linear Guide
Slide Block of Linear Guide (Front Side) 6M4
Every 6 Months Lubrication (DAPHNE EPONEX GREASE No. 1)
Grease should be applied every 6 months after the initial month.
* Use the FL- and P-type or the U- and P-type attachments.
Refer to "1.4.9 Lubrication of Linear Guide in Feeder Carriage Section" for details.
P Type
FL Type
U Type
Fig. 4A29
Front View of Machine
0511-003 1-29
AIL01ETRP
1.3 Maintenance Spots