4OM-1003-007 - 第95页

(16) Nozzle Change/Return Section Rod End 3M9 Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1) Inject grease from the grease nipple with a grease gun. * Use U- and L-type or U- and V -type attachments. Cam Box Oil…

100%1 / 409
(14) Placement Change Correction Section
(15) Nozzle Change Section
Stopper Face 1M16
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
Cylinder Fulcrum 1M17
Every Month Lubrication (MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease gun.
* Use the U- and N-type attachments.
Oil Outlet
U Type N Type
Rod End 3M8
Every-3-Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Inject new grease from the grease nipple with a
grease gun.
* Use the U- and L-type or the U- and V-type
attachments.
U Type L Type V Type
Cam Switchover Surfaces 1M14
Every Month Lubrication (MOLYNOC GREASE AP1)
Apply the grease to both surfaces by hand or using a brush.
Cylinder Fulcrum
Every Month Lubrication
(MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease gun.
* Use the U- and N-type or the U- and S-type
attachments.
1M15
U Type N Type S Type
1.3 Maintenance Spots
0511-002 1-31 AIL01ETRP
Fig. 4A35 Front View of Machine
Fig. 4A36 Front View of Machine
(16) Nozzle Change/Return Section
Rod End 3M9
Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1)
Inject grease from the grease nipple with a grease gun.
* Use U- and L-type or U- and V-type attachments.
Cam Box Oil Outlet
Cam Box 1Y3
Yearly Lubrication (SYNTHESO HT220)
Change the oil with new one after initial 500 hours
and every 6,000 hours for subsequent use.
The proper amount of oil is equivalent to "1/2" of the
oil gauge. (Approx. 2.2 liters)
Note: Do not apply air pressure to the internal area
of the cam box while discharging the oil.
U Type L Type V Type
Cylinder Fulcrum 1M19
Every Month Lubrication
(MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease
gun.
* Use the U- and N-type attachments.
U Type
N Type
Stopper Face 1M18
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
1.3 Maintenance Spots
0511-002 1-32 AIL01ETRP
Fig. 4A37
Rear View of Machine
0305-001 1-33 AIL01ETRP
(17) P.C.B. Transfer Section
Fig. 4A38
1.3 Maintenance Spots