4OM-1003-007 - 第96页
0305-001 1-33 AIL01ETRP (17) P .C.B. Transfer Section Fig. 4A38 1.3 Maintenance Spots
(16) Nozzle Change/Return Section
Rod End 3M9
Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1)
Inject grease from the grease nipple with a grease gun.
* Use U- and L-type or U- and V-type attachments.
Cam Box Oil Outlet
Cam Box 1Y3
Yearly Lubrication (SYNTHESO HT220)
Change the oil with new one after initial 500 hours
and every 6,000 hours for subsequent use.
The proper amount of oil is equivalent to "1/2" of the
oil gauge. (Approx. 2.2 liters)
Note: Do not apply air pressure to the internal area
of the cam box while discharging the oil.
U Type L Type V Type
Cylinder Fulcrum 1M19
Every Month Lubrication
(MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease
gun.
* Use the U- and N-type attachments.
U Type
N Type
Stopper Face 1M18
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
1.3 Maintenance Spots
0511-002 1-32 AIL01ETRP
Fig. 4A37
Rear View of Machine
0305-001 1-33 AIL01ETRP
(17) P.C.B. Transfer Section
Fig. 4A38
1.3 Maintenance Spots
Ball Screw 1M22
Every Month Cleaning
Clean the ball screw with an oiled rag
Ball Screw 3M11
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Wipe off the old grease with a rag and inject
new one from the grease nipple with a
grease gun.
* Use U- and P-type attachments.
Grease should be applied every 3 months
after the initial month.
Linear Guides 3M12
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Wipe off the old grease with a rag and inject
new one from the grease nipple with a
grease gun.
* Use U- and P-type attachments.
Grease should be applied every 3 months
after the initial month.
U Type
No.18
No.19
No.19
P Type
U Type
P Type
Linear Guides 1M23
Every Month Cleaning
Clean the guide with an oiled rag
Ball Surfaces of Linear Guide Slide Block 3M13
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 18 (green) or No. 19 (brown) nozzle.
Grease should be applied every 3 months after the initial month.
Bearing Guide Plane 1M24
Every Month Lubrication (MOLYNOC GREASE AP1)
Apply grease with a dispense gun.
* Use No. 19 (brown) nozzle.
(18) Pick-Up Height Correction Section
1.3 Maintenance Spots
0511-002 1-34 AIL01ETRP
Fig. 4A39 Rear View of Machine