CP7 Series Level3 Tutorial Manual.pdf - 第71页
Chapter 3 D-Axes Objective: Given a CP-7-series machine, technical documentation and required tools, remove, replace and calibrate the D- motors to FUJI specifications.
Notes:
Chapter 2 2.4 Training Evaluation
Edition 2.0 2-14 CP-7-series Level 3 Tutorial
Chapter 3
D-Axes
Objective:
Given a CP-7-series machine, technical
documentation and required tools,
remove, replace and calibrate the D-
motors to FUJI specifications.
3.1 Replacing the D-Axis Motor
The D-motors (refer to figure below) are responsible for moving the pallets, loaded
with feeders, to the left and right at the rear of the machine. This allows the parts
to be carried to the supply position and picked up at station 1.
A poorly adjusted or problematic D-axis will result in pickup offset in the left and
right direction. Recalibration of the D-axis is needed to eradicate this problem.
• Damage or slippage of the coupling that connects the D-motor and the D-axis ball
screw.
• After replacing the D-motor
• After replacing the OT sensors, etc.
Required Tools: 1 Set of Allen Wrenches
1 Phillips Screwdriver
1 Torque Wrench
Required Jig: Pickup position adjustment jig
D1-Axis
D2-Axis
D1-Motor
D2-Motor
CP7T33001
Chapter 3 3.1 Replacing the D-Axis Motor
Edition 2.0 3-1 CP-7-series Level 3 Tutorial