SM411F_Service Manual - 第148页
Softwar e Chapter 3. Board Assembly 3.1. Required Materials for Board Assembly
Software
2.3. How to Use Recovery CD
How to use the Recovery CD
Caution
Before using the Recovery CD, the ‘PartDB’ folder,
‘System’ folder and ‘PCB’ folder in the MMI Installation
Folder must be backed up. (Because all existing data
contained in the HDD are deleted.)
After executing the Recovery CD, install the MMI and
overwrite the backed up folder. Then the machine can be
operated.
After inserting the Recovery CD in the CD-ROM, execute the computer
again with boot priority given to the CD-ROM in the BIOS setup. The PC
is booted to the Restoration CD automatically and the following selection
menu is displayed. Select the No. 2 item and press the ‘Enter’ key.
If the No. 2 item was selected in the previous step, the following menu
appears. Select the No. 1 item.
Once the previous steps are completed successfully, the following dialog
box appears.
Button Executed Item Cautions
Restore
HDD
Sets the drive partition and installs
the OS in the new HDD.
All data in the HDD are
deleted.
Restore
OS
Installs the O/S only in the C: Drive in
the HDD in which the O/S is already
installed.
All data in the C: Drive
are deleted.
Cancel
Cancels the recovery.
Select the button for the necessary execution item.
The Recovery CD program installs the drive partition and O/S for 5~6
minutes according to the user’s setup.
1. Boot from Hard Disk
2. Boot from CD-ROM
1. Restore Hard Drive from CD-ROM
2. Start computer with CD-ROM support
3. Start computer without CD-ROM support
Software
Chapter 3. Board Assembly
3.1. Required Materials for Board Assembly
Software
NO. PART NO. PART NAME Q’TY
TYPE REMARK
1
J4809054A VME BACKPLANE 1 DSOVME-12J1(REV.C)
2 J48011002A
SBC 1
HICORE-I9451VLG
3
J4809054A VME BACKPLANE 1 DSOVME-12J1(REV.C)
4
J91741013A SM330_CAN_MASTER_BOARD 1 VER2.0
5
J9060063E CAN CONVEYOR BOARD ASSY 1
CAN CONVEYOR
(REV1.4)
6
J91741037A SAMC-62 1 G420-U01(STW)
7 J9060413A SM411 VISION I/F BOARD
1
J9060413A
8
J91741012A SM330_TWIN_SERVO_BOARD 1
VER1.0
9
J91741014A X7043_SEDES_BOARD 1
VER1.0
10
J91741015A X7043_STEP_CONTROL_BOARD 1
VER1.0
11
J9060417A FR OPERATE BOARD 1 J9060417A
OPTION
12 J9060408A
SM411 HEAD ILL BOARD 1
J9060408A
13
J91741016A SM330_VME_IO_BOARD 1 VER1.0
14
J9060193B PCI IO BOARD 1 VER 2.0
15
J9060418A MVME 3100 1 MVME 3100
16 J9060409A
SM411 HEAD I/O BOARD 1
J9060409A
17 J9060412A SM411 VACUUM SENSOR BOARD
1
J9060412A
18 J9060338A FEEDER IO BOARD 2 Rev 1.1 NON DOCKING
19
J9060339A FEEDER INPUT EXTENSION BOARD 2 Rev 1.0
20
J91741026A SM330_AXIS_SENSOR_BOARD 1 VER1.0
21
J9060346A CONV SUB I/F BOARD 1 Rev 1.0
22 J91741025A MEGA_CAMERA_IO_BOARDD
1
VER1.0
23 J9060347B
FEEDER BASE LEFT BOARD, NON DOCKING
2 REV 2.1
24 J9060348B
FEEDER BASE RIGHT BOARD, NON DOCKING
2 Rev 2.1
25 J91741023A CONVEYOR PWR BORAD 1 VER1.0