SM411F_Service Manual - 第181页
Electric Device 7. T urn on the main switch on the front side of the machine and perform operation test relating to the corresponding board to check if it operates properly . 3.5.5. Rear Lower Part 1. T urn Off the PC in…
Electric Device
①
BRACKET 조립
SCREW
M4*8으로 2개소 체결
② CONVEYOR BOARD 체결
SCREW M3*6으로 6개소 체결
우측면 후면
후면 우측부
③ Feeder IO BOARD 체결
SCREW M3*6으로 2개소체결
SUPPORT M3*30 4개소 체결
④ Feeder IO ExtentionBOARD 체결
SCREW M3*6으로 4개소체결
M3*6
M3*30
2개소 M4*8 "I" 마킹
②보드부착- SCREW
M3*6으로 4개소체결
M3*6
5. Unscrew the fixing screws to remove the corresponding board by using the
screw driver and replace it.
6. The assembling is performed in the reverse order of disassembling.
Conveyor Sub I/F Board
CAN CONVEYOR BOARD FEEDER CONTROL BOARD
At the Right of the
Rea
r
1. Assemble the Bracket
By Using Screws(M4-2sets)
2. Assemble the Conveyor Board
By Using Screws(M3-6sets)
3. Secure the I/O Board
By Using Screws(M3-2sets)
And Supports(M3- 4 sets)
4. Secure the I/O Extension Board
By Using Screws(M3-4sets)
M4-8mm 2sets
Marking “I”
Assemble the Board by using screws(M3-4sets)
Electric Device
7. Turn on the main switch on the front side of the machine and perform
operation test relating to the corresponding board to check if it operates
properly.
3.5.5. Rear Lower Part
1. Turn Off the PC in normal way. Then turn off the main switch on the front side
of the machine.
2. Remove the rear cover of the machine by using the screw driver.
Direction in which the
main switch is turned
off (counterclockwise)
Cover bolt positions (2
places)
Electric Device
Safety Control & DC Power Board
CN1 CN2
CN3
CN4
CN5
CN27
CN28
CN29
CN20
CN21
CN22
CN23
CN24
CN25
CN26
CN6
CN7
CN8
CN9
CN 10, 11, 12, 13 14, 15, 16, 17, 18, 19
CN27
CN29
SAFETY CONTROL & DC POWER BOARD 본체조립
① SUPPORT M3*30 부착
=> SAFETY CONTROL BOARD
SUPPORT[M3*50]으로 고정
* 플라스틱 커버는 가조립할 것.
M3*30
M3*50
M3*6
M5*10
Control Board P/W distribution signal
Safety Control part
Feeder P/W
Stepping P/W distribution
signal
Assemble the Safety Control and DC
Power Board to the main body
Assemble the support (M3-30mm)
- Secure the safety control board by using support(M3-50mm)
- Secure the safety control board by using support(M3-50mm)