SM411F_Service Manual - 第243页
Softwar e 3. Click <Parameter> button in the ‘ W indow m eun ’ dialog box. 4. Select <Read-out from the amplifier> option button i n the ‘ Selection of parameter to be read ’ dialog box and click <OK> b…
Software
2. To download to driver, click “Trans” Icon and “EEP” Icon to change ROM value in
the driver.
3. Turn off the machine power and then turn on it again. Then, new parameter is applied
to the driver normally.
5.2.5.5. Downloading the specified file to the driver
Warning
Our company provide the specified parameters by each
driver(The driver parameter for Spare Part is downloaded
to the driver in our company before it is forwarded to
users).
1. In order to download Parameter to the driver, perform the procedures ‘5.2.5.2 The
connection between panasonic driver and computer‘ and ‘5.2.5.3 Software
execution‘ and then read the parameter of the driver.
Caution
Back up the parameters saved in the existing driver. The
standard parameters of the manufacturer are saved in the
new driver. However, they may be changed for tuning in
our factory.
2. If closing “Parameter(Read-out from the amplifier)” window, return to the “Window
Menu” state.
Software
3. Click <Parameter> button in the ‘Window meun’ dialog box.
4. Select <Read-out from the amplifier> option button in the ‘Selection of parameter to
be read’ dialog box and click <OK> button.
Software
5. Select the file to be downloaded in the dialog box as shown in the following figure
and click <OK> button.
6. If the file is loaded as shown in the following figure, click ‘Trans’ icon to download
the parameter to the driver.