SM411F_Service Manual - 第30页
Entry & Exit Shuttle Assy 조립기준 19 Assembly position of outlet sensor Stopper br acket must be fit to the end within error of 2m m Assembly position of inlet senso r PCB belt assembly tension Assembly standard: 91±10H…
모터 배치
STEP+ENCODER MOTOR
STEP+ENCODER MOTOR
W
STEP Motor
STEP Motor
STEP Motor
STEP Motor
STEP Motor
STEP Motor
STEP Motor
STEP Motor
STEP+ENCODER MOTOR
STEP+ENCODER MOTOR
STEP+ENCODER MOTOR
STEP+ENCODER MOTOR
LEGEND
B : Bel t 구동 모터
S : Shuttl e 구동 모터
W : 폭조절 구동 모터
B
B
B
B
B
B
B
B
W
W
W
W
S
S
Part name
Standard
Function Maker
STEP MOTOR 2S56Q-01842SR Belt driving motor
SEAHAN
SERVO MOTOR PB PBM423DXC24 Width trimming driving motor
SANYO
SERVO MOTOR PB PBM565DXC26 Shuttle driving motor
SANYO
17
Belt driving motor
Shuttle driving motor
Width trimming driving motor
(SM411)
동력 전달부 규격
Description WORK Width Motor
Entry & Exit Shuttle Move Motor Entry & Exit Width Motor
PCB transfer belt motor
Motor pulley diameter
21.01 - 21.01 31.2
Screw pulley diameter
30.56 - 44.88 -
Screw pitch
25 5-
Moving distance per 1 cycle of
motor
1.375 - 2.340686 98.017691
Motor resolution
200 200 200 200
Driver multiplication rate
44 42
Moving distance per pulse signal
0.001719 - 0.002926 0.2450442
Part name Standard Function Maker
LM_GUIDE SR15W2UU+570LY-II WORK ZONE LM GUIDE THK
Standard: Traveling parallelism 0.015/570, Number of block: 2EA
LEAD SCREW TTMR12+566L WORK ZONE LEAD SCREW THK
Standard: Lead angle=3.31 degree, Lead pitch=2mm, 1 row right rolling trapezoidal slip screw , Precision:±0.1/300mm Grade C8
TIMMING_BELT_WIDTH 180-3GT-9 Connection of width trimming motor and lead screw UNITTA
BELT_WORK MAM-5P-1550-6W Work PCB transfer belt
HABASIT
Electrification prevention
Material of surface : Adhesive property NBR (Acrylonitrile-Butadiene-Rubber), Material : Non-adhesive Polyamide(PA)+Hamid, t=1.2mm
BALL_SCREW 2BTK1405-2.6ZZ+721.5LC7T Shuttle and shuttle width trimming rolling ball screw THK
Standard: Axis diameter 14mm, Lead pitch 5mm, Accumulated lead error ±0.21/300mm, Clearance in axis direction 0.05mm
LM_GUIDE SR15W2UU+728LY-II LM guide of shuttle part THK
Standard: Traveling parallelism 0.015/728, Number of block : 2EA
TIMMING_BELT_SM 432-3GT-12 Connection belt of shuttle motor and ball screw UNITTA
TIMMING_BELT_SW 324-3GT-12 Belt for shuttle width trimming UNITTA
BELT_SHUTTLE_1650 MAM-5P-1169-6W Shuttle PCB transfer belt
HABASIT
Electrification prevention
BELT_SHUTTLE_LONG MAM-5P-1500-6W Shuttle PCB transfer belt for long option
HABASIT
Electrification prevention
Standard of motor resolution
▶ Standard of
main power
transmission part
18
(SM411)
Entry & Exit Shuttle Assy 조립기준
19
Assembly position of
outlet sensor
Stopper bracket must be fit to
the end within error of 2mm
Assembly position of
inlet sensor
PCB belt assembly
tension
Assembly standard: 91±10HZ
Shuttle driving belt
tension
Assembly standard: 125±10HZ
Width driving belt
tension
Assembly standard: 125±10HZ
Rock nut assembly
torque
Assembly standard: 95kgf.cm
(SM411)
Assembly standard of work zone assy.
Position of PCB sensor 38mm±1
PCB transfer belt 40±5 Hz
Measured at the center of belt
Synch belt 22±2.5 Hz
Measured at the center of belt
Width trimming belt 300±20 Hz Measured at the center of belt
Driving resistance of lead screw
pulley
0.6kgfcm Measured before motor connected
Tightening of lead screw rock nut 50Kgf.cm
• Work stopper speed
Ascending: Time from solenoid signal input to sensing of up sensor Æ 300±25msec
Descending : Time from solenoid signal input to sensing of down sensor Æ 250±25msec
• Shuttle stopper speed
Ascending : Time from solenoid signal input to completion of up stroke Æ 200±25msec
Descending : Time from solenoid signal input to completion of down stroke Æ 200±25msec
• Edge fixer Æ The pressure of regulator at consignment is set to 0.1Mpa(±20%) and can be
changed according to weight, material and thickness of PCB. When setting the edge pressure,
drive the solenoid so that air pressure is applied to the regulator.
20
(SM411)
Conveyor - SM411F
21
L510XW300Standard
Field OptionL510XW350Option 1
Factory Option
Option type
L610XW350
PCB
Option 2
Conveyor Option
Same coveyor system with SM421
(SM411F)
Others - SM411F
22
(SM411F)
Two pcs. of alarm lamp for conveniently telling
Operator can easily find out which side of the machine
has problem with shortage of components or minor
errors
Cover for Side Tray is standard