SM411F_Service Manual - 第48页

1.2.1. Axis Home Calibration Sets the limit position of each axis to move. When this button is clicked on, the following dialog box is displayed. Figur e 1- 1. “ System Axis Limit Info. ” dialogbox  <Motor Select>…

1.2. Calibration [F9]

Used to perform calibrations related with the XY Gantry, Conveyor and camera.

The order in which the calibration is performed and the calibration tool needed to

perform the corresponding calibration is as follows;

 Axis Home Calibration

 Skew Compensation

 Fiducail Camera Scale Calibration

 Common X-Y (1

)

 Conveyor Calibration

 X-XY Compensation – Calibration Bar

 Common X-Y (2

)

 Thermal Mapping

 Gantry Mapping

 ANC Fiducial Mark Teaching

 Head & Camera Calibration - CN040, LightFly Nozzle, LightFly Nozzle,

CNT20

 Board Position

1.2.1. Axis Home Calibration

Sets the limit position of each axis to move. When this button is clicked on, the

following dialog box is displayed.

Figure 1-1. “System Axis Limit Info.” dialogbox

 <Motor Select> listbox

Select the motor axis for which to set the limit. Available axes are as follows.

G1F-X: X axis of the gantry1

G1F-Y: Y axis of the gantry1

G1R-X: X axis of the gantry2

G1R-Y: Y axis of the gantry2

H1F-Z1: Z axis of head1 of the gantry1

H1F-Z2: Z axis of head2 of the gantry1

H1F-Z3: Z axis of head3 of the gantry1

H1F-Z4: Z axis of head4 of the gantry1

H1F-Z5: Z axis of head5 of the gantry1

H1F-Z6: Z axis of head6 of the gantry1

H1F-M1: Mirror axis of the Gantry1

H1F-R1: Theta axis (H1, H2) of the Gantry1

H1F-R3: Theta axis (H3, H4) of the Gantry1

H1F-R5: Theta axis (H5, H6) of the Gantry1

H1R-Z1: Z axis of head1 of the Gantry2

H1R-Z2: Z axis of head2 of the Gantry2

H1R-Z3: Z axis of head3 of the Gantry2

H1R-Z4: Z axis of head4 of the Gantry2

H1R-Z5: Z axis of head5 of the Gantry2

H1R-Z6: Z axis of head6 of the Gantry2

H1R-M1: Mirror axis of the Gantry2

H1R-R1: Theta axis (H1, H2) of the Gantry2

H1R-R3: Theta axis (H3, H4) of the Gantry2

H1R-R5: Theta axis (H5, H6) of the Gantry2

ST1F-W: Width control motor of the work Station(F2)

 <Software Limit> Group

 <X-Y Axis Limit Automatic Searching…> button

Finds the limit of the X and Y axes automatically and checks whether to

apply the changed value.

 <Skew Compensation> button

Activated when selecting the Y axis. It is used to perform the skew

compensation. For further details, refer to “1.2.2 Skew compensation”.

 <Calibrate Home> button

Automatically finds and reflects the home position of the motor selected from

the <Motor Select> list box.

 <CALIBRATE HOME ALL AXIS> button

Automatically finds and reflects the home positions of all axes.