2OM-1075-002.pdf - 第102页

AHB01ESPP 1 . 2 Using the Menus 1.2.1 Menus for Automatic Operation • Menu Selection 1. When the [AUTO RUN] button on the main menu bar is pressed, the "AUTO OPN." window opens. The "AUTO OPN." window…

AHB01ESPP0107-001 4-2

*3 [MANAGE. DT.] Button

When this button is pressed, the "Management Data" window opens.

(Section 3 in "Vol. 3: Programming and Machine Data")

*4 [DATA EDIT] Button

When this button is pressed, the "EDIT SEL." menu opens, enabling

you to select the data to be edited. (Section 2 in "Vol. 3: Program-

ming and Machine Data")

*5 [SYSTEM] Button

When this button is pressed, the "SYSTEM SEL." menu opens, en-

abling you to set up the system. (Section 4 in "Vol. 3: Programming

and Machine Data")

1.1.2 Other Operation Buttons

The main menu bar is also provided with the following operation buttons

in addition to the main menu selection buttons.

Fig. 2D3

*1 [RECOG.] Button

When this button is pressed, the "Recog.Dspl.Sel" menu opens,

enabling you to select a display pattern of the recognized image.

("2.4" in Section 4)

*2 [TenKey] Button

When this button is pressed, the "TenKey" window appears. ("2.3.2"

in Section 4)

*3 [?] Button

When this button is pressed, the "HELP" window opens.

*4 [Logout] Button

When this button is pressed, the system exits from window naviga-

tions and the "Login Type Selection" window opens. ("2.5" in Sec-

tion 4)

1.1 Main Menu Bar

AHB01ESPP

1.2 Using the Menus

1.2.1 Menus for Automatic Operation

• Menu Selection

1. When the [AUTO RUN] button on the main menu bar is pressed, the

"AUTO OPN." window opens. The "AUTO OPN." window is provided

with a submenu bar.

2. When one of the buttons on the submenu bar is pressed, the corre-

sponding sheet (submenu) or tab sheets appear inside the "AUTO

OPN." window.

This window is provided with main menus related to the automatic op-

eration of the machine. All operations required for automatic operation

are included in this window.

Fig. 2D4 Selection of Menus for Automatic Operation

1.2 Using the Menus

0308-004 4-3

"AUTO RUN" Submenu Bar

Main Menu Bar

AHB01ESPP

••

• Composition of Menus for Automatic Operation

The menus for automatic operation are composed of the following

submenus.

Refer to "2.1" in "Section 4" for the tabs and tab sheets.

Menus for Automatic Operation

Submenus Tabs (Tab Sheets) Reference Item Nos.

AUTO OPN. Message "2.2" in "Section 5"

State "2.3" in "Section 5"

Origin/Signal Info. "2.4" in "Section 5"

OPN. MODE Run Mode "3.1" in "Section 5"

Altn Fdr Mode "3.2" in "Section 5"

Opn. Mode "3.3" in "Section 5"

Test Run "3.4" in "Section 5"

Head/Noz. Bypass "3.5" in "Section 5"

Camera Bypass "3.6" in "Section 5"

Feeder Reload Feeder Reload "4.1" in "Section 5"

Pickup Tray Matrix (Option)

Tray Comp. Dt (Option)

RECOVERY Current Dt "5.1" in "Section 5"

Comp Carriage Dt Edit "5.2" in "Section 5"

P.C.B. Origin Offset Teach "5.3" in "Section 5"

Place Pos Teach "5.4" in "Section 5"

RECALL Device Err "6.1" in "Section 5"

Handling Err "6.2" in "Section 5"

Machine Info "6.3" in "Section 5"

Comp. Recog. Err "6.4" in "Section 5"

Servo Alarm "6.5" in "Section 5"

Recog. Image "6.6" in "Section 5"

PRGM. CHG. Program Change "7.1" in "Section 5"

Product Change "7.2" in "Section 5"

PCB. Support Pins Set-up Mode "7.3" in "Section 5"

Feeder Unit Set Status "7.4" in "Section 5"

Fig. 2D5 Composition of Menus for Automatic Operation

The above tree is based on the selection of the multi-layer tray

feeder (option).

1.2 Using the Menus

0308-004 4-4

Note