2OM-1075-002.pdf - 第105页

AHB01ESPP • Composition of Menus for Maintenance The menus for maintenance are composed of the following submenus. Refer to "2.1" in "Section 4" for the tabs and tab sheets. Menus for Maintenance Subm…

100%1 / 469
AHB01ESPP
1.2.2 Menus for Maintenance
• Menu Selection
1. When the [MAINT.] button on the main menu bar is pressed, the "MAIN-
TENANCE" window opens. The "MAINTENANCE" window is provided
with a submenu bar.
2. When one of the buttons on the submenu bar is pressed, the corre-
sponding sheet (submenu) or tab sheets appear inside the "MAIN-
TENANCE" window.
The "MAINTENANCE" window is provided with the functions that can be
used to adjust the machine or confirm the performance of the machine.
Fig. 2D6 Selection of Menus for Maintenance
(Provided with Multi-Layer Tray Feeder 2)
The tab sheet may look different, depending on which options
are selected.
1.2 Using the Menus
01 12-002 4-5
"MAINTENANCE" Submenu Bar
Main Menu Bar
Note
AHB01ESPP
• Composition of Menus for Maintenance
The menus for maintenance are composed of the following submenus.
Refer to "2.1" in "Section 4" for the tabs and tab sheets.
Menus for Maintenance
Submenus Tabs (Tab Sheets) Reference Item Nos.
MNL OPN. Zeroing Opn. "2.1" in "Section 6"
Manual Axis Opn. "2.2" in "Section 6"
DVC. TEST X/Y Beam Test "3.1" in "Section 6"
P.E.C. Recog Test "3.2" in "Section 6"
Cmpnt Recog Test "3.3" in "Section 6"
UNIT ADJ. Conveyor Adj "4.1" in "Section 6"
Feeder Base "4.2" in "Section 6"
Nozzle Change "4.3" in "Section 6"
Others "4.4" in "Section 6"
To the next page
Fig. 2D7 Composition of Menus for Maintenance (1)
In the above tree, the leaves (lower tab sheets) are left out.
1.2 Using the Menus
0308-003 4-6
Note
AHB01ESPP
From the previous page
Submenus Tabs (Tab Sheets) Reference Item Nos.
TEACHING Pick-Up Location "5.1" in "Section 6"
Library Teaching "5.2" in "Section 6"
P.E.C. Recog Camr & Beam Ofs "5.3" in "Section 6"
Table Ofs "5.4" in "Section 6"
NC Axis Ofs "5.5" in "Section 6"
Nozzle Level Ofs "5.6" in "Section 6"
Cmpnt Fxd Camr Mag "5.7" in "Section 6"
Cmpnt Recog Fxd Camr Ofs "5.8" in "Section 6"
Head Center Ofs "5.9" in "Section 6"
Head Rotation Ofs "5.10" in "Section 6"
Cmpnt Recog Mvbl Mag "5.11" in "Section 6"
Cmpnt Recog Mvbl Camr Ofs "5.12" in "Section 6"
Nozzle Stocker Ofs "5.13" in "Section 6"
Nozzle Stocker Ofs "5.14" in "Section 6"
Feeder Base Ofs "5.15" in "Section 6"
Feeder (A) Ofs "5.16" in "Section 6"
Feeder (B) Offset "5.17" in "Section 6"
Teaching Plate Ofs "5.18" in "Section 6"
Nozzle Center Ofs "5.19" in "Section 6"
Nozzle Tip Pos Ofs "5.20" in "Section 6"
Head Master Offset "5.21" in "Section 6"
Traverse Ofs (Optiom)
Lighting Teach "5.22" in "Section 6"
DVC. CHECK Input Check "7.1" in "Section 6"
Machine Prgm. Info. "7.2" in "Section 6"
FILE OPN. Save/Load "8.1" in "Section 6"
Fig. 2D7-1 Composition of Menus for Maintenance (2)
(a) In the above tree, the leaves (lower tab sheets) are left out.
(b) The above tree is based on the selection of the multi-layer
tray feeder (option).
1.2 Using the Menus
0308-003 4-6-1
Note