2OM-1075-002.pdf - 第128页

AHB01ESPP 1.1.1 Submenus and T abs The "AUTO OPN." window is provided with the following submenus. Menus for Automatic Operation Submenus T abs (T ab Sheets) Reference Item Nos. AUTO OPN. Message "2.2&quot…

AHB01ESPP

*4 Crnt. Prgm., Comment

Crnt. Prgm. : Model (Pattern Program) Name for Automatic Op-

eration

Comment : Displayed is the comment attached to the current

program.

*5 Run Mode and Stop Mode

Displayed are the run and stop modes of the machine.

Run Mode

AUTO : This indicates that the machine is set in the "AUTO"

mode (automatic production).

PASS : This indicates that the machine is set in the "PASS"

mode.

TEACH : This indicates that the machine is set in the "TEACH"

mode (teaching operation).

Stop Mode

CYCLE: When the machine is set in this mode, it places com-

ponents completely on one P.C.B. and stops running.

STEP : This indicates that the machine is set in the "STEP"

mode (step operation).

When the machine is set in this mode, it stops running

every time one-step placement operation is completed.

This mode is valid only when the [STOP] button is "ON"

(illuminates in red).

1. Outline of "AUTO RUN" Window (Main Menu)

Note

0206-003 5 -2

AHB01ESPP

1.1.1 Submenus and Tabs

The "AUTO OPN." window is provided with the following submenus.

Menus for Automatic Operation

Submenus Tabs (Tab Sheets) Reference Item Nos.

AUTO OPN. Message "2.2" in "Section 5"

State "2.3" in "Section 5"

Origin/Signal Info. "2.4" in "Section 5"

OPN. MODE Run Mode "3.1" in "Section 5"

Altn Fdr Mode "3.2" in "Section 5"

Opn. Mode "3.3" in "Section 5"

Test Run "3.4" in "Section 5"

Head/Noz. Bypass "3.5" in "Section 5"

Camera Bypass "3.6" in "Section 5"

Feeder Reload Feeder Reload "4.1" in "Section 5"

Pickup Tray Matrix (Option)

Tray Comp. Dt (Option)

RECOVERY Current Dt "5.1" in "Section 5"

Comp Carriage Dt Edit "5.2" in "Section 5"

P.C.B. Origin Offset Teach "5.3" in "Section 5"

Place Pos Teach "5.4" in "Section 5"

RECALL Device Err "6.1" in "Section 5"

Handling Err "6.2" in "Section 5"

Machine Info "6.3" in "Section 5"

Comp. Recog. Err "6.4" in "Section 5"

Servo Alarm "6.5" in "Section 5"

Recog. Image "6.6" in "Section 5"

PRGM. CHG. Program Change "7.1" in "Section 5"

Product Change "7.2" in "Section 5"

PCB. Support Pins Set-up Mode "7.3" in "Section 5"

Feeder Unit Set Status "7.4" in "Section 5"

Fig. 2E2 Composition of Menus for Automatic Operation

The above tree is based on the selection of the multi-layer tray

feeder (option).

1. Outline of "AUTO RUN" Window (Main Menu)

0308-004 5-3

Note

AHB01ESPP

2. "AUTO OPN." Window (Submenu)

• Window Layout

When the [AUTO OPN.] button on the submenu bar is pressed, the

following window opens.

Fig. 2E3 "AUTO OPN." Window (Submenu)

• Window Composition

*1 Tabs and Tab Sheets

The "AUTO OPN." window (submenu) is provided with the following

3 tabs. When a tab is pressed, the corresponding tab sheet ap-

pears inside the window.

Table 2E1

Tabs Description

Message This tab sheet displays the step Nos., the feeder Nos., the nozzle

Nos., the nozzle IDs, etc., (related to the picked and placed compo-

nents) in the pattern program.

State This tab sheets displays the management data such as the number

of processed P.C.B.’s, etc.

Origin/Signal Info. This tab sheet displays the origin information on each device and

the real-time signal exchange condition between the main machine

and the input/output machines.

2. "AUTO OPN." Window (Submenu)

0308-004 5-4