2OM-1075-002.pdf - 第164页

AHB01ESPP *2 [Patt Prgm Mgt] Button When this button is pressed, the "Pattern Program Management Data" window for the current pattern program data opens. Fig. 2E19 "Pattern Program Management Data" Wi…

AHB01ESPP

*1 [Pattern Prgm Edit] Button

When this button is pressed, the "Pattern Program" window for the

current pattern program data appears.

Fig. 2E18 "Pattern Program" Window

(a) The data cannot be modified while the machine is in the

"RUN", "WAIT", or "PAUSE" mode.

(b) Refer to "Section 2 Pattern Program" in "Vol. 3" for how to

edit the pattern program.

5.1 "Current Dt" Tab

0308-003 5-25-3

Note

AHB01ESPP

*2 [Patt Prgm Mgt] Button

When this button is pressed, the "Pattern Program Management

Data" window for the current pattern program data opens.

Fig. 2E19 "Pattern Program Management Data" Window

Refer to "Section 4 Management Data" in "Vol. 3" for how to edit

the pattern program management data.

5.1 "Current Dt" Tab

0308-003 5-25-4

Note

AHB01ESPP

5.2 "Comp Carriage Dt Edit" Tab

The corresponding tab sheet enables the operator to easily change the

component carriage data in the current pattern program.

• Sheet Layout

When the "Comp Carriage Dt Edit" tab is pressed in the "RECOVERY"

window, the following tab sheet appears.

Fig. 2E20 "Comp Carriage Dt Edit" Tab Sheet (1/4)

The contents of the tab sheet differs, depending on which model

(current pattern program) is used.

• Sheet Composition

*1 Tabs and Tab Sheets

The "Comp Carriage Dt Edit" tab sheet is provided with the follow-

ing 7 tabs. When a tab is pressed, the corresponding tab sheet

appears.

The contents of each tab sheet are almost the same.

0308-003 5-25-5

5.2 "Comp Carriage Dt Edit" Tab

*4 *5

Note