2OM-1075-002.pdf - 第248页
AHB01ESPP Mark T ype (1) When the [Mark T ype] button is pressed in the "P .E.C. Recog. T est" tab sheet, the "Mark T ype" window appears. Depending on which option is selected in the "Mark Mode&…
AHB01ESPP
3.2.1 Various Data Settings for P.E.C. Recognition Marks
Refer to "2.4 Placement Feeder Location Data" in "Section 2
Pattern Program" of "Vol. 3: Programming and Machine Data"
for the description of each parameter.
P.E.C. Recog Head
(1) When the [P.E.C. Recog Head] button is pressed in the "P.E.C. Recog
Test" tab sheet, the following sheet appears as follows.
Fig. 2F9
(2) Press the [Head1] or the [Head2] button.
The selected button turns yellow, indicating that the corresponding
head for P.E.C. recognition is selected.
(3) When the [Return] button is pressed, the "P.E.C. Recog Test" tab
sheet appears.
0206-003 6-15
3.2 "P.E.C. Recog Test" Tab
*1
Note
AHB01ESPP
Mark Type
(1) When the [Mark Type] button is pressed in the "P.E.C. Recog. Test"
tab sheet, the "Mark Type" window appears.
Depending on which option is selected in the "Mark Mode" group
box (*1), various mark types (options) are displayed in the "Mark
Type" group box (*2).
After selecting a mark type in the "Mark Type" group box (*2), press
the [Return] button (*3).
Fig. 2F10
When the [Through Hole] or the [Pad Mark/Land] button in the
"Mark Mode" group box is selected, different buttons (mark types)
appear in the "Mark Type" group box.
0206-003 6-16
3.2 "P.E.C. Recog Test" Tab
*2
*1
*3
Note
AHB01ESPP
Mark Size D1
(1) When the [Mark Size D1] button is pressed in the "P.E.C. Recog
Test" tab sheet, the following window appears.
Enter a value as "Mark Size D1" and press the [Set] button. The
entered value is specified and the "Mark Size D1" edit window closes.
Fig. 2F11
Mark Size D2
(1) Follow the same procedure as "Mark Size D1" to enter a parameter
in the text box.
Window Size
(1) Follow the same procedure as "Mark Size D1" to enter a parameter
in the text box.
0206-003 6-17
3.2 "P.E.C. Recog Test" Tab