2OM-1075-002.pdf - 第294页

AHB01ESPP [R-Conveyor (-) HI-Speed] Button When the [ENABLE] button on the operation panel is pressed in 2 seconds after this button is selected and the [ON] button (entitled "MOVE") is pressed, the R conveyor …

100%1 / 469
AHB01ESPP
[L-Conveyor (-) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the L conveyor moves backward
at high speed.
[L-Conveyor (-) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the L conveyor moves backward
at low speed.
[P-Conveyor (+) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves forward
at high speed.
[P-Conveyor (+) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves forward
at low speed.
[P-Conveyor (-) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves backward
at high speed.
[P-Conveyor (-) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the P conveyor moves backward
at low speed.
[R-Conveyor (+) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the R conveyor moves forward
at high speed.
[R-Conveyor (+) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the R conveyor moves forward
at low speed.
0107-001 6-61
4.1 "Conveyor Adj" Tab
AHB01ESPP
[R-Conveyor (-) HI-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the R conveyor moves backward
at high speed.
[R-Conveyor (-) Low-Speed] Button
When the [ENABLE] button on the operation panel is pressed
in 2 seconds after this button is selected and the [ON] button
(entitled "MOVE") is pressed, the R conveyor moves backward
at low speed.
*2 Mode
Displayed is the operating mode of each device.
*3 "Control Sw" Group Box
When the [ENABLE] button on the operation panel is pressed in 2
seconds after one of the buttons in "*1" is selected and the [ON]
button (entitled "MOVE") is pressed, the action corresponding to the
selected button takes place.
• Operation Procedure
(1) Select one of the buttons in "*1" as the device to be inspected.
(2) Press the [ON] button (entitled "MOVE"). In 2 seconds, press the
[ENABLE] button on the operation panel.
The motor starts rotating.
To stop the rotation, press the [STOP] button on the operation panel.
01 12-002 6-6 2
4.1 "Conveyor Adj" Tab
AHB01ESPP
4.2 "Feeder Base" Tab
The corresponding tab sheet enables the operator to conduct a perfor-
mance test of the feeder bases.
• Sheet Layout
When the "Feeder Base" tab is pressed in the "UNIT ADJ." window
(submenu), the following tab sheet appears inside the window.
Fig. 2F46 "Feeder Base" Tab Sheet (Provided with Multi-Layer Tray Feeder 2)
The tab sheet may look different, depending on which options
are selected.
• Sheet Layout
*1 "Feeder Base" Group Box
The following buttons are provided in this group box.
[Feeder Base #1] Button
Press this button to activate Feeder Base #1.
[Feeder Base #3] Button
Press this button to activate Feeder Base #3.
[Feeder Base #4] Button
Press this button to activate Feeder Base #4.
Note
0308-004 6-63
4.2 "Feeder Base" Tab
*3
*2
*8
*6
*7
*1
*4
*5
*9