2OM-1075-002.pdf - 第303页

AHB01ESPP 0308-004 6-71 4.3 "Nozzle Change" T ab • Do not change any nozzle when a component is picked up by the head. Otherwise, the vacuum will be turned off, releas- ing the component from the head. *10 *1 *…

100%1 / 469
AHB01ESPP
*8 Nozzle Stocker Open/Closed Status
Indicated is the status that represents if the nozzle stockers are
open or closed.
*9 Nozzle Selection (Nozzle Stocker) Buttons
Select a nozzle stored in the nozzle stocker.
When one of the buttons is pressed, the background color turns
yellow.
*10 "Control Sw" Group Box
When the [ENABLE] button on the operation panel is pressed in 2
seconds after one of the buttons in the "Operation" group box is
selected, the objective action is selected, and the [ON] button (en-
titled "MOVE") is pressed, the selected action takes place.
0308-003 6-70
4.3 "Nozzle Change" Tab
AHB01ESPP
0308-004 6-71
4.3 "Nozzle Change" Tab
• Do not change any nozzle when a component is
picked up by the head.
Otherwise, the vacuum will be turned off, releas-
ing the component from the head.
*10
*1
*6
CAUTION
• Procedure for Nozzle Storage Operation
(1) Press the [Reset Nozzle] button (*1).
The background color of the button turns yellow, indicating that the
nozzle selection (head) buttons (*6) are set active.
Fig. 2F52 "Nozzle Change" Tab Sheet ([Reset Nozzle] Button Selected)
(2) Select the nozzle to be stored in the nozzle stocker by pressing one
of the nozzle selection (head) buttons (*6).
The background color of the selected button turns yellow.
(3) When the [ENABLE] button on the operation panel is pressed in 2
seconds after the [ON] button (*10 entitled "MOVE"), the selected
nozzle is stored in the nozzle stocker.
AHB01ESPP
• Procedure for Nozzle Attachment
(1) Press the [Set Nozzle] button (*2).
The background color of the button turns yellow, indicating that the
nozzle selection (head) buttons (*6) and the nozzle selection (nozzle
stocker) buttons (*9) are set active.
Fig. 2F53 "Nozzle Change" Tab Sheet
([Set Nozzle] Button Selected)
0308-003 6-72
4.3 "Nozzle Change" Tab
• Do not attach any nozzle when a component is
picked up by the head.
Otherwise, the vacuum will be turned off, releas-
ing the component from the head.
*10
*2
*9
*6
CAUTION