2OM-1075-002.pdf - 第316页
AHB01ESPP *3 [Vib. Stick Component Data Offset] Button When pressed, this button makes it possible to perform a teaching operation to align the center of the vacuum nozzle with the center of the component supplied from t…
AHB01ESPP
• Sheet Layout
When the "Pick-Up Location" tab is pressed in the "TEACHING" win-
dow (submenu), the following tab sheet appears inside the window.
Fig. 2F57 "Pick-Up Location" Tab Sheet
••
••
• Sheet Composition
*1 [Tape, Vib. Stick Teach Pick-Up Pos. [Comp. Center Pos.]] But-
ton
When pressed, this button makes it possible to perform a teaching
operation to align the component center with the nozzle center.
When this button is pressed, the "Tape, Vib. Stick Teach Pick-Up
Pos. [Comp. Center Pos.]" sheet appears.
Refer to "5.1.1 "Tape, Vib. Stick Teach Pick-Up Pos. [Comp. Center
Pos.]" Sheet" for details.
*2 [Tape, Vib. Stick Teach Ecc. Pick-Up Pos. [Pickup Loc. Adj.]]
Button
When pressed, this button makes it possible to perform a teaching
operation on the eccentric pick-up correction position against hin-
drance to component picks at the center.
When this button is pressed, the "Tape, Vib. Stick Teach Ecc. Pick-
Up Pos. [Pickup Loc. Adj.]" sheet appears.
Refer to "5.1.2 "Tape, Vib. Stick Teach Ecc. Pick-Up Pos. [Pickup
Loc. Adj.]" Sheet" for details.
5.1 "Pick-Up Location" Tab
0206-003 6-83
*1
*2
*3
*4
AHB01ESPP
*3 [Vib. Stick Component Data Offset] Button
When pressed, this button makes it possible to perform a teaching
operation to align the center of the vacuum nozzle with the center of
the component supplied from the vibratory stick feeder.
When this button is pressed, the "Vib. Stick Component Data Off-
set" sheet appears.
Refer to "5.1.3 "Vib. Stick Component Data Offset" Sheet" for de-
tails.
*4 Other Buttons
These buttons are optional.
5.1 "Pick-Up Location" Tab
0206-003 6-84
AHB01ESPP
5.1.1 "Tape, Vib. Stick Teach Pick-Up Pos. [Comp. Center Pos.]"
Sheet
The corresponding sheet makes it possible to perform a teaching op-
eration to align the component center with the nozzle center.
••
••
• Sheet Layout
When the [Tape, Vib. Stick Teach Pick-Up Pos. [Comp. Center Pos.]]
button is pressed in the "Pick-Up Location" tab sheet, the following sheet
appears.
Fig. 2F58 "Tape, Vib. Stick Teach Pick-Up Pos. [Comp. Center Pos.]" Sheet
••
••
• Sheet Composition
*1 "Select Head" Group Box
Select the head to be used for teaching operations.
The following buttons are provided in this group box.
[X1 Head] Button
When this button is pressed, a teaching operation is performed,
using the X1 head.
[X2 Head] Button
When this button is pressed, a teaching operation is performed,
using the X2 head.
5.1 "Pick-Up Location" Tab
0206-003 6-85
*1
*2
*3
*4
*7
*8
*9
*10
*11
*6
*12
*5