2OM-1075-002.pdf - 第378页
AHB01ESPP • Image Scroll/Zoom Function The object image can be zoomed in or out or scrolled up or down. T able 2F21 Keys Functions The displayed image and graphic can be zoomed in (enlarged). The enlarged image and graph…
AHB01ESPP
• Change of Selected Parameter
Fig. 2F104-19
To change the selected parameter, select one of the check boxes.
A yellow check box indicates that it is selected.
Click the check box (item) to be selected and press the [OK] button.
The selected check box turns yellow, indicating that the item is selected
(specified).
(3) Other Functions
The following shows the functions that can be used for editing, etc.,
of parameters.
• Graphic Relocation Function
1) To relocate the graphic roughly, using the adjuster
Change of Position X/Y:
Move the cursor to the center of the adjuster as shown
in the left figure and click the center. The graphic can be
moved in the X and Y directions.
When you click the center again after the relocation, the
position is defined.
Change of Angle θ :
Move the cursor close to the arrow tip of the adjuster as
shown in the left figure and click the tip. The angle (theta)
of the graphic can be changed.
When you click the tip again after the angle is changed,
the angle is defined.
2) To relocate the graphic finely with the keys
The graphic can be relocated more finely than the adjuster.
Table 2F20
Keys Functions
The graphic can be moved in the selected direction.
The graphic can be rotated in the selected direction.
5.2 Library Teaching
0308-001 6-144-1
AHB01ESPP
• Image Scroll/Zoom Function
The object image can be zoomed in or out or scrolled up or down.
Table 2F21
Keys Functions
The displayed image and graphic can be zoomed in (enlarged).
The enlarged image and graphic can be zoomed out (reduced).
The image and graphic cannot be reduced to be smaller than the origi-
nal size. (zoomed out to the original size)
The scrolled or zoomed image and graphic return to the original location
and size.
Scroll It can be determined whether or not the displayed image and graphic
ON/OFF can be scrolled.
This scroll function makes it possible to shift the image such that the
hidden part of the image (part of the image hidden behind a subwindow)
becomes visible.
••
••
• Image Capture Function
Table 2F22
Keys Functions
An image can be captured in the selected lighting system.
Front Lighting System < - > Back Lighting System
5.2 Library Teaching
0308-001 6-144-2
AHB01ESPP
5.3 "P.E.C. Recog Camr & Beam Ofs" Tab
The corresponding tab sheet enables the operator to perform the teach-
ing operation on the P.E.C. recognition camera & X/Y beam offset data.
The offset values are calculated by recognizing the printed pattern on
the positioned special jig P.C.B. (option) with the P.E.C. recognition cam-
era.
Determine the magnification and tilting (Theta Z) of the P.E.C. recogni-
tion camera and the tilting of the beam (Angles X and Y).
This teaching operation must be performed only by our service
personnel.
• Sheet Layout
When the "P.E.C. Recog Camr & Beam Ofs" tab is pressed in the
"TEACHING" window (submenu), the following tab sheet appears in-
side the window.
Fig. 2F105 "P.E.C. Recog Camr & Beam Ofs" Tab sheet
5.3 "P.E.C. Recog Camr & Beam Ofs" Tab
Note
0206-003 6-145
*1
*2
*5
*4
*3
*6
*7
*8
*9
*10
*11