2OM-1075-002.pdf - 第4页
About the Instruction Manual V olume 5: Pneumatic and Electrical Diagrams This provides various kinds of material such as pneu- matic and electrical circuit diagrams for those who are in charge of machine servicing opera…
About the Instruction Manual
• This instruction manual is classified into several volumes on subjec-
tive basis as follows.
Volume 1: Operation (Operator)
This describes the fundamentals for those who read
this instruction manual and use the Multi-Functional
Mounter for the first time.
Coverage: This covers the checking items, the safety
precautions, the scope of the machine, the
preparatory and ending procedures of au-
tomatic operation, and the troubleshooting
on simple errors.
Volume 2: Operation (Supervisor)
This describes the general items related to machine
operations for those who have learned how to operate
the machine.
Coverage: This covers the specifications and func-
tions of the machine and various menus
related to the program change, automatic
operations, and maintenance, etc.
Volume 3: Programming and Machine Data
This describes various data for a programmer(s) who
creates pattern programs and a supervisor who must
understand the meanings of various data.
Coverage: This covers the various data such as pat-
tern program, component library data, and
the menus for production control and sys-
tem settings.
Volume 4: Maintenance and Troubleshooting
This describes periodic maintenance operations,
troubleshooting, etc., for those who use this machine.
Coverage: This covers periodic maintenance opera-
tions, the list of consumables and servic-
ing parts, troubleshooting on simple errors,
and error messages and remedial mea-
sures against simple errors.
Fig. 2X2
Fig. 2X3
Fig. 2X4
Fig. 2X5
0206-003 2 AHB01ESPP
About the Instruction Manual
Volume 5: Pneumatic and Electrical Diagrams
This provides various kinds of material such as pneu-
matic and electrical circuit diagrams for those who are
in charge of machine servicing operations.
Coverage: Pneumatic Diagram, Parts Location, Elec-
trical Circuit Diagrams, etc.
COMPONENT LIBRARY:
This describes an explanation of component library data
and how to create it.
• This manual may not be copied, in whole or part, with-
out written consent of the publisher.
• This manual should be regarded as part of the ma-
chine and the contents comply with all the specifica-
tions regarding the purchased machine. Please keep
this manual within reach to serve as a handy tool in
completely understanding the workings of this ma-
chine.
• The contents of this manual are subject to change
without prior notice.
Fig. 2X6
Fig. 2X7
0107-001 3 AHB01ESPP
Contents
Page
Before Use .......................................................................................... 1
About the Instruction Manual ............................................................ 2
Contents .............................................................................................. 4
Checking Items.................................................................................... 11
Safety Precautions .............................................................................. 13
Section 1 Scope
........................................................................1- A
1. Features .......................................................................................1- 1
2. Specifications ..............................................................................1- 2
3. Standard Accessory Parts ..........................................................1-24
3.1 Standard Accessory Parts List ...............................................1-24
4. Vacuum Nozzle Types .................................................................1-25
5. Adjoining Pitch for Tape Feeder Installation ............................1-27
5.1 Minimum Adjoining Pitch Based on Guide Feeder ..............1-27
5.2 Installable Feeder Slot Nos.
at Both Feeder Base Ends ............................................1-27
6. Fixed Recognition Cameras .......................................................1-28
6.1 Types of Fixed Recognition Cameras ...................................1-28
6.2 Compound View Unit (Option) ...............................................1-30
Section 2 Scope of Actions and
Various Functions
.............................................2- A
1. Outline of Actions ........................................................................2- 1
1.1 P.C.B. Transfer and Positioning .............................................2- 1
1.2 Component Placement
(starting with preparation for component picks)..............2- 3
1.2.1 Preparation for Component Picks ....................................2- 4
1.2.2 Component Supply and Pick-up ........................................2- 5
1.2.3 Preparation for Component Placement ...........................2- 6
1.2.4 Component Placement .......................................................2-11
1.3 Discharge of P.C.B. .................................................................2-12
2. Various Functions ........................................................................2-13
2.1 Equivalent Repetitive Pattern Function ...............................2-13
2.2 Multi-Model Repetitive Pattern Function for
Mixed Programs ...................................................................2-14
2.3 Priority Sorting Function ........................................................2-15
2.4 P.E.C. Recognition Function ..................................................2-16
2.5 Automatic Feeder Axis Adjustment Function ........................2-18
2.6 Conveyor Width Automatic Adjustment Function.................2-18
2.7 File Operation ..........................................................................2-18
0308-004 4 AHB01ESPP