2OM-1075-002.pdf - 第40页
41. Requirements for Simultaneous Component Picks (1) Feeders Available for Simultaneous Component Picks T ape Feeders Vibratory Stick Feeders Multi-Layer T ray Feeders Note: The components from the multi-layer tray feed…
(2) Stick Components
Table 2A11
Note: Some components cannot be used due to the mechanical
characteristics. Consult our marketing department or sales
agency for details.
(3) Tray Components
Table 2A12
Unit: mm
Notes: (a) In the case of connectors, up to 100 × 26 mm can be
handled.
(b) Irregular-shaped components can also be used when
an optional device is provided.
(c) Some components cannot be used due to the mechani-
cal characteristics. Consult our marketing department
or sales agency for details.
2. Specifications
0206-003 1-22 AHB01ESPP
41. Requirements for Simultaneous Component Picks
(1) Feeders Available for Simultaneous Component Picks
Tape Feeders
Vibratory Stick Feeders
Multi-Layer Tray Feeders
Note: The components from the multi-layer tray feeder can-
not be picked up simultaneously.
(2) Requirements for Simultaneous Picks (Head-to-Head Dis-
tance)
• Simultaneous Component Picks on Same Feeder Base
The feeder-to-feeder pitch for component picks must be
equivalent to more than 6 lanes (feeder slot Nos.).
• Simultaneous Component Picks on Different Feeder
Bases
No condition is required.
• Simultaneous Component Picks on Feeder Base and
Tray
No condition is required.
Note: Some restriction is placed in the Y direction.
2. Specifications
0206-003 1-23 AHB01ESPP
3. Standard Accessory Parts
3.1 Standard Accessory Parts List
Table 2A13
3. Standard Accessory Parts
0308-003 1-24 AHB01ESPP