2OM-1075-002.pdf - 第441页
AHB01ESPP 5.22 "Lighting T each" T ab The corresponding tab sheet makes it possible to teach various kinds of lighting-related parameters. This teaching operation must be performed only by our service personnel…
AHB01ESPP
5.21 "Head Master Offset" Tab
*4 Teaching Operation Selection Buttons
The following buttons are provided.
[All Beam Heads Zero] Button:
When this button is pressed, all X/Y beams are zeroed.
[Teach Start] Button:
When this button is pressed, a teaching operation is per-
formed, using the selected head.
[Mvt to Noz Attachment Posn] Button:
When this button is pressed, the head moves to the speci-
fied feeder No. (Fdr. No.) position.
*5 Offset Values
Displayed are the current values and the adjusted ones after teach-
ing.
*6 Set Status
When "All Beam (Incl. NC Axis) Heads Zero" is completed, the back-
ground color of "All Beam Zero" turns green. (Otherwise, the back-
ground has no color.)
(a) When each device is not zeroed and the teaching op-
erations are performed, note that the offset values may
not be taught correctly.
(b) Before performing a teaching operation, be sure to
zero all beams.
*7 [Mnl Noz Chng] Button
When this button is pressed, the "Nozzle Change" sheet appears.
Refer to "4.3 "Nozzle Change" Tab" for details.
*8 [Clear Adj.] Button
When pressed, this button clears the results of the teaching opera-
tion.
*9 [Cancel] Button
When pressed, this button ends the results of the teaching opera-
tion without reflecting them on the offset data.
*10 [End] Button
When this button is pressed, a "Confirmation" dialog box opens.
When the [YES] button is pressed, the results of the teaching op-
eration are reflected on the offset data and the dialog box closes.
*11 "Control Switch" Group Box
Select one of the teaching item selection buttons and press the [ON]
button (entitled "MOVE"). After that, press the [ENABLE] button on
the operation panel in 2 seconds. A teaching operation is performed
on the selected item.
Note
0308-004 6-206
AHB01ESPP
5.22 "Lighting Teach" Tab
The corresponding tab sheet makes it possible to teach various kinds of
lighting-related parameters.
This teaching operation must be performed only by our service
personnel.
••
••
• Sheet Layout
When the "Lighting Teach" tab is pressed in the "TEACHING" window
(submenu), the following tab sheet appears.
Fig. 2F132-1 "Lighting Teach" Tab Sheet
The tab sheet may look different, depending on which options are se-
lected.
••
••
• Sheet Composition
*1 "Select Head" Group Box
Select the head to be used for teaching operations.
The following buttons are provided in this group box.
[X1 Head] Button
When this button is pressed, a teaching operation is performed,
using the X1 head.
[X2 Head] Button
When this button is pressed, a teaching operation is performed,
using the X2 head.
Note
*2
*1
*3
*5
*8
*9
*10
*11
*12
*13
*7
*6
*4
5.22 "Lighting Teach" Tab
0308-001 6-206-1
AHB01ESPP
*2 "Type" Group Box
Set the type of lighting to be used for teaching operations.
The following buttons are provided in this group box.
[Standard] Button
When this is selected, the standard lighting is used for teaching
operations.
[Ceramic] Button
When this is selected, the ceramic lighting is used for teaching op-
erations.
*3 [Fdr. No.] Button
When this button is pressed, the "Fdr. No." edit window opens. En-
ter the feeder No. to which the head must be moved, using the ten-
key pad.
*4 "Selection of Teaching Operation" Group Box
The following buttons are provided in this group box.
[All Beam Zero] Button
When this button is pressed, all X/Y beams are zeroed.
[P.E.C. Recog Ltg Teach] Button
When pressed, this button performs a teaching operation on the
lighting for the P.E.C. recognition camera on the head section.
[Offset Lighting Teach] Button
When pressed, this button performs a teaching operation on the
lighting for the backlight plate (used for offset teaching).
[Fixed camera Back Lighting Teach] Button
When pressed, this button performs a teaching operation on the
back lighting for the fixed recognition camera.
[Fixed camera Front Lighting Teach] Button
When pressed, this button performs a teaching operation on the
front lighting for the fixed recognition camera.
[Movable camera Back Lighting Teach] Button
When pressed, this button performs a teaching operation on the
back lighting for the movable recognition camera.
[Movable camera Front Lighting Teach] Button
When pressed, this button performs a teaching operation on the
front lighting for the movable recognition camera.
5.22 "Lighting Teach" Tab
0308-001 6-206-2