2OM-1075-002.pdf - 第69页

0206-002 2 - 20 AHB01ESPP 2.10 Component Carriage Data Edit Function This function enables the operator to easily change the component car- riage data in the current pattern program. The function can be used when the pac…

2.8 Simultaneous Pick-Up Function

When two heads pick up the components from the corresponding feed-

ers, both heads descend and pick up the components simultaneously,

shortening the cycle time.

Table 2B8

Step Reference

1. Creating a Pattern Program

"2.5 Placement Data" in "Section 2" of "Vol. 3: Program-

ming and Machine Data"

• C02 Placement Data (P)

2.9 Pick-Up Priority Function

This function is based on the idea that the beams can be operated effi-

ciently if two heads (right and left heads) can pick up components at the

same time and follow the component placement sequence.

By pairing two steps of placement data (setting "2" in the "S" text box of

the placement data), each component can automatically be placed effi-

ciently in the order of the specified placement steps through the se-

quence "Pick Æ Pick Æ Recognition Æ Recognition Æ Place Æ Place".

The automatic feeder axis adjustment mode becomes valid for both

right and left heads when components are picked up.

Table 2B9

Step Reference

1. Creating a Pattern Program

"2.5 Placement Data" in "Section 2" of "Vol. 3: Program-

ming and Machine Data"

• C02 Placement Data (P)

01 12-002 2-19 AHB01ESPP

2.8 Simultaneous Pick-Up Function

0206-002 2-20 AHB01ESPP

2.10 Component Carriage Data Edit Function

This function enables the operator to easily change the component car-

riage data in the current pattern program.

The function can be used when the packaged posture of the supplied

component differs from that of the component being used so far due to

unavailability, etc.

Only the limited data for the packaged posture can be changed.

Table 2B10

Step Reference

1. Temporary Change of "4.2 "Comp Carriage Dt Edit" Tab" in "Section 5"

Component Carriage Data

2.11 Pick-Up Location Teaching Function

This function enables the operator to teach and correct the component

pick-up location through manual alignment operation.

After the function is performed, the pick-up rate might be improved.

Table 2B11

Step Reference

1. Pick-Up Location Teaching "5.1 "Pick-Up Location" Tab" in "Section 6"

Function

2.12 Library Teaching Function

This function enables the operator to automatically create component

library data or manually create and correct the component library data.

In addition, the recognition test function also makes it possible to make

a recognition test of the component library data.

Table 2B12

Step Reference

1. Library Teaching "5.2 Library Teaching" in "Section 6"

2.10 Component Carriage Data Edit Function

Note

2.13 Feeder Alternate Function

When a feeder becomes short of components, this function selects a

prepared spare feeder. After all components are picked up from the spare

feeder, another spare feeder is selected. The prepared spare feeders

must contain the components of frequently used types.

When a component shortage error occurs and this function is activated,

the interval time for component replenishment can be prolonged and

the feeders short of components can be replenished with components

collectively.

To Implement the Alternate Feeder Mode

(1) Set "Enable" in the "Feeder Alternate" text box and specify the feeder

No. (destination feeder No.) in the "Fdr No." text box of the "Place-

ment Feeder Location" tab sheet in the "Pattern Program" edit win-

dow.

Fig. 2B23 "Placement Feeder Location" Tab Sheet in "Pattern Program" Edit Window

Requirements for "Fdr. No." Setting

• The component IDs must be identical between the feeder No. where

the alternate feeder mode is set (alternate source feeder No.) and

the alternate destination feeder No.

• The alternate destination feeder Nos. (Fdr No.) must be specified in

the following ranges.

Table 2B13

Feeder Base #1 101 to 132

Feeder Base #3 301 to 332

Feeder Base #4 401 to 432

FB #3 VIB Feeder #1 341 to 349

FB #3 VIB Feeder #2 351 to 359

FB #3 VIB Feeder #3 361 to 369

FB #4 VIB Feeder #1 441 to 449

FB #4 VIB Feeder #2 451 to 459

FB #4 VIB Feeder #3 461 to 469

2.13 Feeder Alternate Function

0308-002 2-21 AHB01ESPP