2OM-1075-002.pdf - 第86页

Fig. 2C6 Setting of P .C.B. Support Pins Be sure to insert the P .C.B. support pins at right angles. If the pins are inserted improperly , the machine will break down. When some components are previously placed on the ba…

3.2.3 Setting of P.C.B. Support Pins and Precautionary Items on

Detachment

Fig. 2C4 P.C.B. Support Pin

Fig. 2C5 Unavailable Position of Pin Insertion

Be sure to remove the P.C.B. support pin before the

automatic set-up operation.

When a P.C.B. support pin is inserted at the bottom

side of the movable chute as shown in Fig. 2C5, it

may collide with the backup plate while the plate is

moving up.

0308-004 3-8 AHB01ESPP

3.2 Setting of P.C.B. Support Pins

CAUTION

Fig. 2C6 Setting of P.C.B. Support Pins

Be sure to insert the P.C.B. support pins at right

angles.

If the pins are inserted improperly, the machine

will break down.

When some components are previously placed

on the back of the P.C.B. and P.C.B. support pins

are inserted, make sure that no pin touches a com-

ponent.

When a component is trapped or dust has accumulated on

the backup plate, the height of the P.C.B. support pins can-

not be set correctly.

In this case, remove the component or dust with a vacuum

cleaner, etc. (Air Blowing Prohibited)

0308-003 3-9 AHB01ESPP

3.2 Setting of P.C.B. Support Pins

CAUTION

Note

3.3 Conveyor Width Adjustment

Perform the all device overall setup operation, using the "Product

Change" tab sheet of the "PRGM CHG." window (submenu).

Fig. 2C7 "Product Change" Tab Sheet

When the all device overall setup operation is performed, the following

devices are automatically adjusted.

Width Adjustment in Conveyor Section

Fig. 2C8 Conveyor Section

3.3 Conveyor Width Adjustment

0308-004 3-10 AHB01ESPP