2OM-1075-002.pdf - 第90页
3. 5 Preparation for Feeders The following is explained, presuming that the tape feeders are being used. As for the preparation for the vibratory stick feeders and the multi-layer tray feeders (option), refer to each ins…
3.4 P.C.B. Positioning
The P.C.B.’s can be positioned, using the "P.C.B. Transfer Adj" tab sheet
of the "UNIT ADJ." window (submenu).
Fig. 2C9 "P.C.B. Transfer Adj" Tab Sheet
Operation Procedure
(1) Press the [PCB Thickness] button and enter a parameter as P.C.B.
thickness.
(2) Press the [B.P.C. Standby Posn] button and select a parameter as
P.C.B. standby position.
(3) Select the [Transfer PCB Locate Posn] button and press the [ON]
button (entitled "MOVE"). After that, press the [ENABLE] button on
the operation panel in two seconds.
(4) Select the [Move B.P.C. to PCB Locate Posn] button and press the
[ON] button (entitled "MOVE"). After that, press the [ENABLE] but-
ton on the operation panel in two seconds.
Refer to "4.1.1 "P.C.B. Transfer Adj" Tab" in "Section 6" for de-
tails.
3.4 P.C.B. Positioning
0308-004 3-12 AHB01ESPP
Note
3.5 Preparation for Feeders
The following is explained, presuming that the tape feeders are
being used.
As for the preparation for the vibratory stick feeders and the
multi-layer tray feeders (option), refer to each instruction manual
for details.
Operation Procedure
(1) Refer to the placement feeder location data in the pattern program
and check the required tape feeders.
(2) Replenish each tape feeder with components.
(3) Detach the feeder base pullout prevention bar.
(4) Confirm which types of tape feeders (grip colors and types) should
be allocated to which feeder slot Nos. (Fdr. Nos.) before installing
the tape feeders.
Fig. 2C10
Refer to "Attachment and Detachment of Tape Feeders to Feeder
Base" in the instruction manual of tape feeders for details.
(5) Attach the feeder base pullout prevention bar.
• Install tape feeders correctly such that they are
seated securely. Otherwise, a collision with the head
section or a pick-up error will occur.
• Be sure to install the tape feeders on the correct
feeder slot Nos. (Fdr. No.). Otherwise, some
components may be trapped between the heads.
3.5 Preparation for Feeders
0308-004 3-13 AHB01ESPP
Fdr. No. Plate
Grip
CAUTION
Note
Note
3.6 P.E.C. Recognition Test
This test must be performed such that the P.E.C. recognition camera
can correctly recognize the fiducial marks on a P.C.B.
When "Enable" is set in the "P.E.C. recognition function" text box in the
"P.E.C. Recognition Data" tab sheet of the "Pattern Program" window,
follow the steps below to perform a P.E.C. recognition test.
Operation Procedure
(1) Prepare a P.C.B. to be used for actual production and make a P.E.C.
recognition test to verify each set parameter.
• Whenever the parameters set in the "Mark Type", "Mark Size",
"Window Size", "Recognition Algorithm", "Fiducial Mark Image",
and "Fiducial Mark Level" text boxes are changed, be sure to modify
the original pattern program data.
(a) Refer to "3.2 "P.E.C. Recog Test" Tab" in "Section 6" for a
P.E.C. recognition test.
(b) Refer to "P.E.C. Recognition Mark Data" in "Vol. 3: Pro-
gramming and Machine Data" for the detailed information
on how to change a pattern program.
3.6 P.E.C. Recognition Test
0206-003 3-14 AHB01ESPP
Note