00198045-01_OM_BulkFeeder_X_EN - 第8页
SIPLACE BulkFeede r X / Operating Ma nual 05/2017 Edition 8 Cartridge Carry the Cart ridge by picking it in the middle. ► Do not touch the plate with t he plate shutter and pic kup plate (1) . This mechanism is very ► da…
SIPLACE BulkFeeder X / Operating Manual 05/2017 Edition
7
1.2 Operational Safety
1.2.1 Warning Labels
High temperatures around the camera
CAUTION
Hot surface warning
The camera may be hot. Be careful when touching the BulkFeeder X.
1.2.2 Feeder Handling
Base Unit
Carry the Base Unit in the handle (1). ►
NOTICE
Only move the Base Unit with installed Cartridge.
As the weight is nearly 6.5 kg, it may be necessary to carry the Base Unit with both
hands.
Pick the Base Unit in the handle with one hand and at the front side (close to the EDIF and ►
front centering pin) with the other hand.
Do not touch the gap on the side panels where the camera is installed. The camera might get ►
out of place.
Treat the Base Unit carefully. ►
The Base Unit is equipped with a small foot on the side of the 3rd track. Thus, it can be put down
standing on the table. However, due to the small support base it is safer to lay it down on the side
on a smooth surface.
Do NOT throw, drop or overbalance the Base Unit.
SIPLACE BulkFeeder X / Operating Manual 05/2017 Edition
8
Cartridge
Carry the Cartridge by picking it in the middle. ►
Do not touch the plate with the plate shutter and pickup plate (1). This mechanism is very ►
damageable.
The Cartridge can be put down on the table.
1.2.3 Classification of the SIPLACE BulkFeeder X Illumination
NOTICE
Bright LEDs are installed in the SIPLACE BulkFeeder X. These are classified in the risk
group 1 in accordance with IEC 62471:2006.
Do not look into the beam! ►
SIPLACE BulkFeeder X / Operating Manual 05/2017 Edition
9
1.3 Other Instructions
1.3.1 Environmentally-Friendly Disposal of Materials and Components
SIPLACE products are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way.
NOTICE
Observe the applicable regulations
The company operating the system has sole responsibility for the proper,
environmentally-
friendly disposal of machines, working materials, consumables and wear
parts.
Please observe your national statutory provisions for waste disposal and ►
environmental protection.
1.3.2 Use of Original SIPLACE Accessories and Spare Parts
Only use original spare parts and authorized accessories. The use of other parts will affect safety
and will invalidate the liability for any consequential damage.
1.3.3 Release History
Changes
05/2017 First edition
1.3.4 ASM on the Internet (WWW)
You can log on to the ASM® homepage at http://www.asm-smt.com.
Choose between the German and English version.
The various sections of the website contain information on our products, services, and the people
to contact.
In addition to this, registered customers also have access to the MySIPLACE user group. Here,
you can find specific information about our placement machines, including:
● technical documentation,
● technical information,
● lists of spare parts, and so on.
Registration for access to the MySIPLACE is very simple:
1. Click in the header on the website, and then click the Register
link.
2. Fill in the registration form and send it off.
You will soon receive your user name and password with which you can access MySIPLACE.