7OM-1603-006_w - 第107页
7OM-1603 3-2 Chapter 3 : 1. Maintenance Menu 1 102-003 1.2 "Unit Change" Window [1] [2] [3] [4] [5] "Unit Change" window F7C2 [1] Unit Image The image of the unit currently selected is displayed in th…
7OM-1603
Chapter 3 : 1. Maintenance Menu
3-11109-004
1. Maintenance Menu
1.1 Outline of Maintenance Menu
The following shows the hierarchical structure of the menus (including the
submenus and windows) for the maintenance menu.
Note
The shadowed (gray) items are related to the multi-layer tray feeder.
Menus for Maintenance Reference Item Nos.
"Unit Adj." Submenu 1.3
1.2
1.4
1.4.1
1.4.2
"Unit Change" Window
"Shipment Adj." Window
1.4.3
"DVC Check" Submenu
"INP/OUT" Window
"MOTOR" Window
"RECOG" Window
"NOZ. CHNG." Window
"LINE MEAS" Window
"CONVEYOR" Window
"COM. STAT" Window
"PRGM. INFO." Window
"MaintWM" Window
"Pass Opn." Window
Outline of Maintenance Menu F7C1
7OM-1603
3-2
Chapter 3 : 1. Maintenance Menu
1102-003
1.2 "Unit Change" Window
[1]
[2]
[3]
[4]
[5]
"Unit Change" window F7C2
[1] Unit Image
The image of the unit currently selected is displayed in this section.
[2] Unit select
The selection of the feeder to be changed, is performed using these selection
buttons.
The display changes according to the selected unit.
When "Tray JEDEC" is selected F7C3
Graphic
Development
7OM-1603
Chapter 3 : 1. Maintenance Menu
3-3
[3] Change Order Guidance
The multi-layer tray feeder attachment procedure window and removal
procedure window, are displayed.
"Change Order Guidance" Window F7C4
[4] Teach
[Traverse Axis Draw] Button
When this button is pressed, the teaching operation for the traverse cart
drawing operation offset for each machine is performed by means of teaching
the mark position setup on the traverse cart chuck claw section.
Note
The traverse cart drawing teaching pin is required separately.
[Tray Transfer Tch] Button
When this button is pressed, the tray pallet transfer teaching operation is
performed.
[5] [Apply] Button, [Cancel] Button
[Apply] Button
When this button is pressed, the changed unit is applied.
[Cancel] Button
When this button is pressed, the changed unit is cancelled and the unit before
the change is returned.
1102-003