7OM-1603-006_w - 第19页

Safe-8 Safety Precautions 7OM-1603 1 109-001 4. Alert Indications in Instruction Manual Alert Indications described as " W ARNING " (continued) Alert Description Related Items Before maintenance work, set the p…

100%1 / 195
Safe-7
Safety Precautions
7OM-1603
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as "
WARNING
"
Alert Description Related Items
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them.
Doing otherwise will cause personal injury (serious accident).
Onlyqualiedmaintenancepersonnelshoulddetachthe
safety covers.
The machine should be operated with the covers being
attached.
If a safety cover is detached, be sure to reattach it.
Be sure to close the magazine door before operating the
machine.
Do not disengage the interlock of the magazine door.
"3" in "Chapter 1"
When the elevator unit is to be moved, pay attention the
inclinationoftheooranddifferenceinlevel.Iftheooris
inclined 10/1000 mm or more, the elevator might fall down,
which might cause a serious accident.
"3.1" in
"Chapter 1"
Donotbringthetrayxingmagnetclosetotheareawhere
a pacemaker is implanted. Otherwise, the pacemaker may
beinuencedbyelectromagneticimpulsesofthemagnet,
causing the wearer to faint, etc.
"3.6" in
"Chapter 1"
Only a well-trained service person should perform
maintenancetaskscarefullythroughthespeciedprocedures.
"1.1" in
"Chapter 4"
4. Alert Indications in Instruction Manual
1109-004
Safe-8
Safety Precautions
7OM-1603
1109-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Before maintenance work, set the power breaker of the
machine (SIGMA-G4/G5) to "OFF" and lock it with the
padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 4"
Before detaching the maintenance cover, be sure to turn off
the power breaker and lock it with a padlock.
"3.2.2" and
"3.2.5" in
"Chapter 4"
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in performing the work.
•
Be sure to attach the cutter blade cover to the cut unit during
the maintenance work for safety purposes.
"3.2.5.1" in
"Chapter 4"
Safe-9
Safety Precautions
7OM-1603
4. Alert Indications in Instruction Manual
1109-004
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Because the magazine is heavy, take care handling it when it
is moved. Otherwise, you might injure your arm or waist.
"3.4" in
"Chapter 1"
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servo amplier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF.
"1.1" in
"Chapter 4"
After the maintenance work, be sure to attach the cover back
in place.
"3.2.2" and
"3.2.5" in
"Chapter 4"
Whentheatringiscut,takecarenottogetinjuredbythe
commercially available cutter.
"3.2.5.1" in
"Chapter 4"