7OM-1603-006_w - 第20页

Safe-9 Safety Precautions 7OM-1603 4. Alert Indications in Instruction Manual 1 109-004 Alert Indications described as " CAUTION " Alert Description Related Items Because the magazine is heavy , take care handl…

100%1 / 195
Safe-8
Safety Precautions
7OM-1603
1109-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Before maintenance work, set the power breaker of the
machine (SIGMA-G4/G5) to "OFF" and lock it with the
padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 4"
Before detaching the maintenance cover, be sure to turn off
the power breaker and lock it with a padlock.
"3.2.2" and
"3.2.5" in
"Chapter 4"
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in performing the work.
•
Be sure to attach the cutter blade cover to the cut unit during
the maintenance work for safety purposes.
"3.2.5.1" in
"Chapter 4"
Safe-9
Safety Precautions
7OM-1603
4. Alert Indications in Instruction Manual
1109-004
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Because the magazine is heavy, take care handling it when it
is moved. Otherwise, you might injure your arm or waist.
"3.4" in
"Chapter 1"
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servo amplier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF.
"1.1" in
"Chapter 4"
After the maintenance work, be sure to attach the cover back
in place.
"3.2.2" and
"3.2.5" in
"Chapter 4"
Whentheatringiscut,takecarenottogetinjuredbythe
commercially available cutter.
"3.2.5.1" in
"Chapter 4"
Safe-10
Safety Precautions
7OM-1603
5. Alert Labels
1109-002
5. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact the marketing department or
sales agency of Hitachi High-Technologies for the replacement with a new one.
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.