7OM-1603-006_w - 第41页
7OM-1603 0908-001 1-B
7OM-1603
0908-001 1-A
Chapter 1
Guide
This chapter describes the outline, actions, and functions of the feeder.
1. Outline
2. Various Functions and Outline of Actions
3. Name of Each Section and Handling
7OM-1603
0908-001 1-B
7OM-1603
Chapter 1 : 1. Outline
1-11109-004
1. Outline
1.1 What is Multi-Layer Tray Feeder?
This unit consists of the JEDEC / FULL size traverse cart and cutter unit and
elevator unit and is used to supply the tray components to be setup on the elevator
unit to the "chip mounter SIGMA-G4/G5"
1.2 Specications
noitpircseD metI
1. Model Name GS-FP100 : JEDEC Size Multi-Layer Tray Feeder
GS-FP200 : FULL Size Multi-Layer Tray Feeder
2. Construction of
Device
• JEDEC / FULL Size Traverse Cart
• Cutter Unit
• Elevator Unit
• Magazine (GS-MG100) : 2 pieces / Elevator Unit
For 15 Steps of Pallet (Total Component Thickness 8 mm or less)
• Pallet (GS-MP100) : 15 Pieces / Magazine
Notes : (a) The magazine (GS-MG100) is dedicated to the multi-layer
tray feeder for SIGMA-G4/G5.
The use of the magazine (MG-G110/115) for GXH-1/3 is not
available.
(b) The pallet (GS-MP100) is dedicated to the multi-layer
tray feeder for SIGMA-G4/G5.
The use of the pallet (MP-G100) for GXH-1/3 is not available.
• Tray Fixing Magnet (GS-MF100) : 30 Pieces / Magazine
T7A1