7OM-1603-006_w - 第45页

7OM-1603 1-4 Chapter 1 : 1. Outline n o i t p i r c s e D m e t I 6. Tray Arrangement Notes : (a) No tray should be put in the shadowed area. Note : In the case of the multi-functional head (GS-MH100), the components wit…

7OM-1603

Chapter 1 : 1. Outline

1-3

Item Description

Notes : (a) "t1" or "t2" ("Note a" in the above table) is more than 8 mm and

14 mm or less in height (thi ckness), keep the upper pallet empty

for such components.

(b) "S (Leeway)" becomes "Max. 0.5 mm" when the outer

dimensions of the mold is "9 × 9 mm" or less.

(d) Some trays cannot be used due to the mechanical characteristics.

(e) When the tray where "t1" or "t2" value exceeds 14 mm, is to be

handled, the multi-functional head is required.

(f) In the case that "t2" value is less than 3 mm, the middle-size

odd shaped nozzle (option) is required.

4. Applicable

Components

Applicable Components

• Flat Packaged ICs

• Connector

• Other similar-shaped components

Unit : mm

Notes : (a) In the case of connector, up to 100 × 26 mm can be handle.

(b) The irregular-shaped components can also be used when an

optional device is provided.

characteristic.

(d) When the component size (a × b) exceeds "44 × 44 mm" the

multifunctional heads (option) are required.

(e) In the case that the "t" va lue exceeds 12.7 mm, the multi-

functional head (option) is required.

5. Number of

Installable Types

of Components

Max. 9 types / pallet (used under programming)

• When the magazine (GS-MG100) is used : 270 types

a b c d t Lead End

Thickness

Mass

Min. 7 7 5 5 - 0.10 -

Max. 55

Note d

52 52 25.4

Note e

20 g

T7A3

1109-003

7OM-1603

1-4

Chapter 1 : 1. Outline

noitpircseD metI

6. Tray

Arrangement

Notes : (a) No tray should be put in the shadowed area.

Note : In the case of the multi-functional head (GS-MH100), the components

with the size range of over 131 mm can not be picked up.

Note : In the case of the multi-functional head (GS-MH100), the components

with the size range of over 218.5 mm can not bepicked up.

(b) In the case of the multi-functional head (GS-MH100), the

components with the size range of over 131 mm can not be

picked up.

components with the size range of over 218.5 mm can not be

picked up.

JEDEC Size Multi-Layer Tray Feeder (GS-FP100)

FULL Size Multi-Layer Tray Feeder (GS-FP200)

7. Installable

Number

of Pallets

Max. 15 pallets / magazine × 2 magazines

Note : The number of installable pallets is limited, depending upon the tray

height.

Area where no

tray should be put

Pallet origin

Pallet

Tray

Note

T7A4

1109-004

7OM-1603

Chapter 1 : 1. Outline

1-5

1003-002

noitpircseD metI

8. Total Mass of

Magazine

Max. 40 kg / magazine

Note : The total mass of installed magazines should be Max. 2 kg per pallet.

Referential Total Mass

{(Component + Tray Fixing Magnet + Magnet Attachment)

+ Pallet} × 15 Steps + Magazine

= {1.63 + 0.7} × 15 + 5

= 40 kg

9. Magazine Batch

Replacement

Magazines can be replaced in batches.

10. Magazine

Separation

Function

The section where magazines are installed can be transferred at the upper or

the lower end of the elevator, making it possible to replace magazines or trays

while the machine is running.

11. Power Supply 200 V AC (The power is supplied from the main machine of SIGMA-G4/G5.)

12. Apparent Power Approx. 3.0 kVA (Reference)

13. Air Pressure 0.45 MPa (4.6 kgf/cm

)

Note : Use the dry and clear air as follows.

Moisture

: Dew Point - 17 ºC or less (Atmospheric Pressure)

Oil

: 0.1 mg/m³ or less (ANR)

Dust

: Solid 0.01

µm or less

(The air is supplied from the main machine of SIGMA-G4/G5.)

14. Air Consumption Approx. 2 L/min (Normal)

15. Mass JEDEC / FULL Size

Traverse Cart : Approx. 140 kg

(The total mass of magazines is excluded.)

Elevator Unit : Approx. 180 kg

(The total mass of magazines is excluded.)

Magazine : Approx. 5 kg

(The total mass of Pallets is excluded.)

Pallet : Approx. 700 g

Tray Fixing Magnet : Approx. 25 g

Magnet Attachment : Approx. 2 g

T7A5