7OM-1603-006_w - 第76页

7OM-1603 Chapter 2 : 2. Menus for Automatic Operation 2-7 2.2.2 "Tray Comp.Dt" T ab sheet When the [Tray Comp.Dt] tab is pressed in the "Comp.Reload" window the "Tray Comp.Dt" tab sheet appe…

7OM-1603

2-6

Chapter 2 : 2. Menus for Automatic Operation

[4] Step Selection Buttons

When a magazine and a step are selected, the "Block Information" window

appears, making it possible to check and change the tray matrices.

[5]

[6]

[7]

"Block Information" window F7B6

[5] "Block Information" Sheet

Shown is the block information.

[6] Tray Pickup Matrix Setting Buttons

Shown is the tray pickup matrix data.

When the [Edit] button is pressed, an input window opens, making it possible

to set the tray pickup matrix data.

Note

As for the blocks that are not used in the pattern program, no tray pickup

matrix setting button is displayed.

[7] [Return] and [Set] Buttons

[ ] Button

: When pressed, this button sets the edited tray pickup

matrix data and opens the tray pickup matrix editing

window.

[

] Button

: When pressed, this button cancels the selection of the

tray pickup matrix data and opens the tray pickup matrix

editing window.

1003-002

7OM-1603

Chapter 2 : 2. Menus for Automatic Operation

2-7

2.2.2 "Tray Comp.Dt" Tab sheet

When the [Tray Comp.Dt] tab is pressed in the "Comp.Reload" window the "Tray

Comp.Dt" tab sheet appears.

[1]

[2]

"Tray Comp.Dt" tab sheet F7B7

[1] Information Display

Shown is the tray component data.

[2] "#of PCB Alm.for Shtg.Comp" Group Box

Set the number of PCBs to issue a component shortage alarm.

The [Edit] button can be used to set an arbitrary number of PCBs.

1003-002

7OM-1603

2-8

Chapter 2 : 2. Menus for Automatic Operation

2.3 "OPERATION" Window

When the [Opr.Mode] tab is pressed in the "OPERATION" window the following

window appears.

"OPERATION" window F7B8

The "OPERATION" window is composed of the "Run Mode", "Opr.Mode", "Test

Mode", "Altn Mode" windows.

For the tray elevator or tray traverse operation speed reduction designation, the

setting can be performed.

1102-004

Graphic

Development