CP45X-Y轴控制部分派断 - 第4页
3. X-Y(Frame) Part Ver. Date CP45 CP45NEO 00 2004/11 O O 3-1 3-3. X Ball Screw Change Process *T o o l s a) hex wrench set . H eight ga ge and indicat or. *P a r t a)Ball Screw (J6606014A),Bearing support (J7154090B), Be…
3. X-Y(Frame) Part
Ver. Date CP45
CP45NEO
00 2004/11 O O
3-1
3-2. How to Distinguish Parameter of Motor Driver Driver
*Tools
a)
*Part
a)
1) Parameter Distributed through SGSS Should be Used.
The Way to Distinguish Parameter File is as Follows.
No.
Axis Index
Ball Screw
Index
CP45F(V) CP45NEO
C45NEO-
Large PCB
1
X
KURODA 45_X_K.APO 45N_X.PRM 45N_X.PRM
2 TSUBAKI 45_X_T.APO
3
Y
KURODA 45_Y_K.APO 45N_Y.PRM 45N_Y_L.PRM
4 TSUBAKI 45_Y_T.APO
5
Z
H1,H3,H5
45_Z.APO
45N_Z135.PRM 45N_Z135.PRM
6 H2,H4,H6 45N_Z246.PRM 45N_Z246.PRM
7 Swing 45_S.APO 45N_S.PRM 45N_S.PRM
8 Width 45_W.APO 45n_W.PRM 45n_W.PRM
3. X-Y(Frame) Part
Ver. Date CP45
CP45NEO
00 2004/11 O O
3-1
3-3. X Ball Screw Change Process
*Tools
a) hex wrench set. Height gage and indicator.
*Part
a)Ball Screw (J6606014A),Bearing support (J7154090B), Bearing Bracket-X(J7154089B)
Support Unit(J6601086A),Coupling(J6012010A)
1) Remove Cover(Cover of right side of MC)
2) Disassemble Xaxis Motor and Coupling
3) Remove Lock Nut, Support Unit(Fig 3-3-1)
4) Disassemble NUT of Ball Screw from Head Base
5) Remove Ball Screw(Remove direction to motor assemble side)
6) assemble new Ball Screw and Bearing and than locking by Ring
7) Assemble ball Screw by redirection.
8) Move Head Base to center and fasten nut of ball screw.
At this time, That space is 39.5(+,-)0.02mm between Top side of X axis L/M and Ball Screw Nut.
(Data form KURODA Ball Screw)
9) Assemble Support Unit and Lock Nut
10)Assenble Coupling and X axis motor.
*) attention : Please, do not remove Bearing Support and Bearing Bracket-X on X axis Frame.
* Adjustments after this work
- PCB origin offset,
- Feeder Base Origin Offset,
- ANC fiducial position and Hole position.
- Tray Feeder Origin
Fig.3-3-1 D isassemble the bolt for Support unit
& Nut(Ball screw).
Lock Nut
Bolt for Support Unit
(4EA)
Bolt for Ball screw nut
(4EA)
Fig.3-3-2 Note : Don't disassemble Bearing
Support and Bearing Bracket-X
Bearing Support
Bearing Bracket-X
3. X-Y(Frame) Part
Ver. Date CP45
CP45NEO
00 2004/11 O O
3-1
No. Code Discription Remark
1
J9705955A Motor-X (Q)
J9080103A Motor-X (P)
J9061931B Motor-X (PY-NON CE)
J9061225B Motor-X (PY-CE)
2 J6612010A Cpuling-X
3 J6601086A Support Unit (FK12)
4 J7154089B Bearing Bracket-X
5 J6606014A Ball Screw (KURODA)
6
J7154090B Bearing Support -X
J1300509 Bearing (6000ZZ)
C-Ring (dia 10)
7 J7154123B Bracket Chusion-X
8 J7254007C Chshion