Error Code List.pdf - 第32页

AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 9 1711 θ A a xis minu s o ve rrun in terl ock DESCRI PTIO N Th e m in u s o v er r u n i n t er l o c k of t h e θ A ax is w a s de te cte d . CAUSE θ A mi nus o v…

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-8

1705

Handle interlock

DESCRIPTION

Pushing H axis rotation wheel was detected.

CAUSE

H axis wheel detection (800C3:bit2) was detected while H axis was running.

SOLUTION

Please return H axis rotation wheel to original position.

NOTE

1706

Feeder float interlock (Left)

DESCRIPTION

Feeder float interlock of left part supply unit was detected.

CAUSE

ZL feeder float detection sensor (80041:bit1) was detected while ZL axis was running.

SOLUTION

Please confirm the setting of part supply unit left feeder.

NOTE

1707

Feeder float interlock (Right)

DESCRIPTION

Feeder float interlock of right part supply unit was detected.

CAUSE

ZR feeder float detection sensor (80001:bit6) was detected while ZR axis was running.

SOLUTION

Please confirm the setting of part supply unit right feeder.

NOTE

1708

Power failure interlock

DESCRIPTION

The power failure was detected while the machine was running.

CAUSE

Power failure (80580:bit7) was detected while the machine was running.

SOLUTION

Please turn power failure reset signal (805A0:bit7) on and off by the [Output check] of [Machine adjustment] to reset

power failure.

NOTE

1709

θH axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the θH axis was detected.

CAUSE

θH plus overrun (800C1:bit2) was detected while the θH axis was running. θH axis is located near mechanical

stopper.

SOLUTION

Please confirm θH plus overrun detection. Please confirm θH axis position.

NOTE

1710

θA axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the θA axis was detected.

CAUSE

θA plus overrun (80041:bit4) was detected while the θA axis was running. θA axis is located near mechanical

stopper.

SOLUTION

Please confirm θA plus overrun detection. Please confirm θA axis position.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-9

1711

θA axis minus overrun interlock

DESCRIPTION

The minus overrun interlock of the θA axis was detected.

CAUSE

θA minus overrun (80041:bit6) was detected while the θA axis was running. θA axis is located near mechanical

stopper.

SOLUTION

Please confirm θA minus overrun detection. Please confirm θA axis position.

NOTE

1712

V axis plus overrun interlock

DESCRIPTION

The plus overrun interlock of the V axis was detected.

CAUSE

V plus overrun (80082:bit0) was detected while the V axis was running. V axis is located near mechanical stopper.

SOLUTION

Please confirm V plus overrun detection. Please confirm V axis position.

NOTE

1713

V axis minus overrun interlock

DESCRIPTION

The minus overrun interlock of the V axis was detected.

CAUSE

V minus overrun (80082:bit2) was detected while the V axis was running. V axis is located near mechanical stopper.

SOLUTION

Please confirm V minus overrun detection. Please confirm V axis position.

NOTE

1714

X axis plus/minus overrun interlock

DESCRIPTION

The plus/minus overrun interlock of the X axis was detected.

CAUSE

X plus/minus overrun (80582:bit5) was detected while the X axis was running. X axis is located near mechanical

stopper.

SOLUTION

Please confirm X plus/minus overrun detection. Please confirm X axis position.

NOTE

1715

Y axis plus/minus overrun interlock

DESCRIPTION

The plus/minus overrun interlock of the Y axis was detected

CAUSE

Y plus/minus overrun (80582:bit4) was detected while the Y axis was running. Y axis is located near mechanical

stopper.

SOLUTION

Please confirm Y plus/minus overrun detection. Please confirm Y axis position.

NOTE

1716

ZL/ZR axes plus overrun interlock

DESCRIPTION

The plus overrun interlock of the ZL/ZR axes was detected.

CAUSE

ZL/ZR plus overrun (80582:bit7) was detected while the ZL/ZR ax was running. ZL/ZR axes is located near

mechanical stopper.

SOLUTION

Please confirm ZL/ZR plus overrun detection. Please confirm ZL/ZR axes position.

NOTE

AV131

ERROR CODE LIST

2.4 Errors

D79EEC-91-210-A0

2.4-10

1717

ZL/ZR axes minus overrun interlock

DESCRIPTION

The minus overrun interlock of the ZL/ZR axes was detected.

CAUSE

ZL/ZR minus overrun (80582:bit6) was detected while the ZL/ZR ax was running. A ZL/ZR ax is located near

mechanical stopper.

SOLUTION

Please confirm ZL/ZR minus overrun detection. Please confirm ZL/ZR axes position.

NOTE

1718

Ring IO communication interlock

DESCRIPTION

RING IO communication interlock was detected.

CAUSE

There is a possibility of coming off and the disconnection of the RING communication optical cable.

SOLUTION

Please confirm the RING communication optical cable.

NOTE

1720

Axis Moving interlock

DESCRIPTION

Direct start signal was off while axes was running.

CAUSE

Axis was not completed within its timing by the axis moving delay.

Direct start signal was off due to the power failure.

The direct start signal was off by the disconnection of cycle timer rotary encoder.

SOLUTION

Please confirm the axis where the error display. Please confirm axis movement is smooth, and confirm there is no

groan or Vibration.

Please release the power failure and restart operation.

Please confirm the state of the rotary encoder.

NOTE

1809

Servo ready off error

DESCRIPTION

The axis where the error occurred is not in NC ready status.

CAUSE

Ready input signal for the servo amplifier or NC board remains OFF.

SOLUTION

Check the condition of the servo amplifier, motor and NC/IO board.

NOTE

1811

(+) Overrun error

DESCRIPTION

Plus limit sensor for the axis where the error occurred was turned ON.

CAUSE

Plus limit sensor input was detected while the axis was moving (including starting to move) in the positive direction

for positioning or teaching.

SOLUTION

Close the error screen and move the axis in the negative direction. Or returning the axis to its origin also will do.

NOTE