Error Code List.pdf - 第65页
AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 42 2710 Sa fe ty re la y re se t c on di tion DESCRI PTIO N Sa fe ty re la y i s s t ill ope n w he n ope rate s a fety s top c lea r. S o s afe ty stop co n dit i…
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-41
2682
26 / 52 change error
DESCRIPTION
The result of 26 mm chuck shunting detection sensor in slide chuck was not corresponding to chuck information on
the insertion parts.
CAUSE
26/52 pitch switch action may not be completed up to the cycle timer 280 degrees.
There is a possibility of the breakdown of 26 mm shunting detection sensor.
SOLUTION
Please confirm whether 26 / 52 pitch switch operates correctly.
Please confirm whether 26 mm shunting sensor detect correctly.
NOTE
2696
No PCB on XY table
DESCRIPTION
XY table failed to detect PCB.
CAUSE
Reference pin has not been positioned to the reference hole of the PCB correctly.
Faulty PCB detection sensor
Bent PCB detection lever
SOLUTION
Check if the PCB is positioned properly to the XY table.
Check that the PCB detection sensor functions properly.
Check the PCB detection lever for any bent.
NOTE
2697
Feeder type error (26 / 52)
DESCRIPTION
Feeder (loaded on the part supply unit) type error was detected.
CAUSE
Feeder type specified in the parts data and actual feeder do not agree.
(1) The type of the feeder loaded on the part supply unit is wrong.
(2) The type of the feeder in the parts data has not been specified correctly.
SOLUTION
Check the feeder type loaded on the part supply unit.
Check the feeder type specified in the parts data.
NOTE
2707
H axis origin off
DESCRIPTION
H axis has not stopped in the machine origin.
CAUSE
H axis has come off from the machine origin.
SOLUTION
Please make H axis servo free and return H axis to the machine origin by the handle operation.
NOTE
2708
Feeder float detection error
DESCRIPTION
Feeder float of part supply unit was detected.
CAUSE
Before moving part supply axis feeder float detection sensor was detected.
SOLUTION
Please confirm the setting of feeder on part supply unit.
NOTE
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-42
2710
Safety relay reset condition
DESCRIPTION
Safety relay is still open when operate safety stop clear. So safety stop condition is still continued.
CAUSE
Safety relay may be abnormal. There is a possibility that some cover still opened.
SOLUTION
Please confirm safety relay by the input check of the machine adjustment.
Please confirm whether all the covers are closed.
NOTE
2731
PCB carry in restart cancel
DESCRIPTION
Restart of PCB carry-in was canceled.
CAUSE
Conditions required for restarting PCB carry-in may have not been satisfied.
SOLUTION
Check the conditions for restarting PCB carry-in.
NOTE
2732
PCB carry out restart cancel
DESCRIPTION
Restart of PCB carry-out was canceled.
CAUSE
Conditions required for restarting PCB carry-out may have not been satisfied.
SOLUTION
Check the conditions for restarting PCB carry-out.
NOTE
2733
PCB sweep out restart cancel
DESCRIPTION
Restart of PCB sweep-out was canceled.
CAUSE
Conditions required for restarting PCB sweep-out may have not been satisfied.
SOLUTION
Check the conditions for restarting PCB sweep-out.
NOTE
2734
PCB carry start conditional not satisfies
DESCRIPTION
Failed to start PCB carry.
CAUSE
Lack of conditions required for starting PCB carry
SOLUTION
Check the conditions for starting PCB carry.
NOTE
2735
Rail down condition not satisfies
DESCRIPTION
The rail failed to be moved down.
CAUSE
Lack of conditions required for moving down the rail.
SOLUTION
Check the conditions for moving down the rail.
NOTE
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-43
2736
Arm carry condition not satisfies
DESCRIPTION
The transfer arm failed to move.
CAUSE
Lack of conditions required for moving the transfer arm.
SOLUTION
Check the conditions for moving the transfer arm.
NOTE
2737
Arm slowdown condition not satisfies
DESCRIPTION
The transfer arm failed to slow down.
CAUSE
Lack of conditions required for slowing down the transfer arm.
SOLUTION
Check the conditions for slowing down the transfer arm.
NOTE
2738
Rail up condition not satisfies
DESCRIPTION
The rail failed to be moved up.
CAUSE
Lack of conditions required for moving up the rail.
SOLUTION
Check the conditions for moving up the rail.
NOTE
2739
Arm return condition not satisfies
DESCRIPTION
The transfer arm failed to return.
CAUSE
Lack of conditions required for returning the transfer arm
SOLUTION
Check the conditions for returning the transfer arm.
NOTE
2748
Emergency stop switch ON safety stop
DESCRIPTION
Emergency switch was detected.
CAUSE
An emergency stop switch was pressed.
SOLUTION
Release the emergency stop switch. (There are five switches. Front; 2 Rear; 3) If the same message appears after
releasing the switch, the switch may be broken. Confirm emergency SW signal in the [Input check] of [Machine
adjustment].
NOTE
2756
Axis related error
DESCRIPTION
Axis fault detected.
CAUSE
An axis error has occurred; however its factors cannot be determined.
SOLUTION
Check the conditions of the time when the error occurred and the details of the error, and then contact us.
NOTE