Error Code List.pdf - 第66页
AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 43 2736 Ar m ca rr y c o nd it ion no t s at is fie s DESCRI PTIO N Th e tran sfe r ar m fa ile d to move . CAUSE Lack of conditions re quired f or mo vi ng the tr…
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-42
2710
Safety relay reset condition
DESCRIPTION
Safety relay is still open when operate safety stop clear. So safety stop condition is still continued.
CAUSE
Safety relay may be abnormal. There is a possibility that some cover still opened.
SOLUTION
Please confirm safety relay by the input check of the machine adjustment.
Please confirm whether all the covers are closed.
NOTE
2731
PCB carry in restart cancel
DESCRIPTION
Restart of PCB carry-in was canceled.
CAUSE
Conditions required for restarting PCB carry-in may have not been satisfied.
SOLUTION
Check the conditions for restarting PCB carry-in.
NOTE
2732
PCB carry out restart cancel
DESCRIPTION
Restart of PCB carry-out was canceled.
CAUSE
Conditions required for restarting PCB carry-out may have not been satisfied.
SOLUTION
Check the conditions for restarting PCB carry-out.
NOTE
2733
PCB sweep out restart cancel
DESCRIPTION
Restart of PCB sweep-out was canceled.
CAUSE
Conditions required for restarting PCB sweep-out may have not been satisfied.
SOLUTION
Check the conditions for restarting PCB sweep-out.
NOTE
2734
PCB carry start conditional not satisfies
DESCRIPTION
Failed to start PCB carry.
CAUSE
Lack of conditions required for starting PCB carry
SOLUTION
Check the conditions for starting PCB carry.
NOTE
2735
Rail down condition not satisfies
DESCRIPTION
The rail failed to be moved down.
CAUSE
Lack of conditions required for moving down the rail.
SOLUTION
Check the conditions for moving down the rail.
NOTE
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-43
2736
Arm carry condition not satisfies
DESCRIPTION
The transfer arm failed to move.
CAUSE
Lack of conditions required for moving the transfer arm.
SOLUTION
Check the conditions for moving the transfer arm.
NOTE
2737
Arm slowdown condition not satisfies
DESCRIPTION
The transfer arm failed to slow down.
CAUSE
Lack of conditions required for slowing down the transfer arm.
SOLUTION
Check the conditions for slowing down the transfer arm.
NOTE
2738
Rail up condition not satisfies
DESCRIPTION
The rail failed to be moved up.
CAUSE
Lack of conditions required for moving up the rail.
SOLUTION
Check the conditions for moving up the rail.
NOTE
2739
Arm return condition not satisfies
DESCRIPTION
The transfer arm failed to return.
CAUSE
Lack of conditions required for returning the transfer arm
SOLUTION
Check the conditions for returning the transfer arm.
NOTE
2748
Emergency stop switch ON safety stop
DESCRIPTION
Emergency switch was detected.
CAUSE
An emergency stop switch was pressed.
SOLUTION
Release the emergency stop switch. (There are five switches. Front; 2 Rear; 3) If the same message appears after
releasing the switch, the switch may be broken. Confirm emergency SW signal in the [Input check] of [Machine
adjustment].
NOTE
2756
Axis related error
DESCRIPTION
Axis fault detected.
CAUSE
An axis error has occurred; however its factors cannot be determined.
SOLUTION
Check the conditions of the time when the error occurred and the details of the error, and then contact us.
NOTE
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-44
2757
PCB recognition error (23)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Invalid recognition parameter
SOLUTION
Check for any abnormality in the recognition parameter.
NOTE
2758
PCB recognition error (16)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Outline detection error occurred with the recognition hole.
SOLUTION
Check the condition of the PCB hole.
NOTE
2759
PCB recognition error (17)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Improper hole search area
SOLUTION
Check the value of the search area size in the recognition initial setting. Check the condition of the target hole.
NOTE
2760
PCB recognition error (19)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Scanned image is abnormal.
SOLUTION
Check the camera for proper condition. Check the condition of the target hole.
NOTE
2761
PCB recognition error (45)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Improper shape of the target hole
SOLUTION
Check the condition of the target hole.
NOTE
2762
PCB recognition error (47)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Improper diameter of the target hole
SOLUTION
Check the condition of the target hole.
NOTE